Abrasive Cut Off Wheels

Abrasive cut off wheels are used for cutting metal, either to remove it entirely or to remove pieces of it. They are not designed for precision work and leave a rough surface that will need to be deburred and smoothed before the components can be used in their ultimate application.

Cut-off wheels make tiny, accurate cuts at 90-degree angles, whereas grinding wheels employ an abrasive to grind large amounts of material of a workpiece from a shallow angle. As a result, these wheels are frequently thinner than grinding wheels; with more precise cuts.

There are many different types of abrasive cut off wheels, each designed for a specific purpose. Some of the most common types include: <li>Bonded cut off wheels: These wheels are made of abrasive grains that are bonded together with a resin or rubber binder. They are typically used for cutting metal, concrete, and other hard materials. <li>Reinforced cut off wheels: These wheels have a fiberglass mesh reinforcement that makes them stronger and more durable than bonded cut off wheels. They are typically used for cutting metal and other tough materials. <li>Diamond cut off wheels: These wheels are made of diamond particles that are bonded together with a metal matrix. They are the most expensive type of cut off wheel, but they are also the most durable and can cut through the hardest materials.

The type of abrasive cut off wheel you need will depend on the material you are cutting, the thickness of the material, and the speed at which you will be cutting. If you are unsure which type of wheel to choose, it is always best to consult with a professional.

When using abrasive cut off wheels, it is important to take the following safety precautions: <li>Wear eye protection and hearing protection. <li>Use a guard to protect your hands and body from flying sparks. <li>Keep the wheel clean and free of debris. <li>Never use a wheel that is damaged or cracked.