Aluminum Rod Continuous Casting And Rolling Machine

This Aluminum Rod Continuous Casting And Rolling Machine is used for producing conductive aluminium rod of 12 i 9.5mm and 7.6mm by means of continuous casting and rolling technology, among which 11 rolling stands for 12mm aluminium rod, 13 rolling stands for 9.5mm aluminium rod and 15 rolling stands for 7.6mm rolling stands.

II. Technological Process
1. Schematic diagram of technological process:
Aluminium Ingot or aluminium Scrapa Melting Furnacea Holding Furnacea Continuous Casting Machine a Oil Hydraulic Sheara Continuous Rolling Machine a Dual-spoola Continuous Winding Machinea Finished Rod
2. The molten aluminium from the melting furnace flows to the wheel-type continuous casting machine through the launder, and is made into trapezium ingot with a cross section of 2420mm2. Then, the finished ingot is cut off by oil hydraulic shear while the top of the ingot is pressed smaller to feed into the continuous rolling machine. At last, the finished rod is wound as coils by dual-spool winding machine.

III. Main technical Specifications:
Diameter of conductive aluminium rod: 12, 9.5, 7.6mm
Productivity: 2.5-4.5 t/h
Total size of the line: 32.05x7.2x4.2m
Total weight of the line: 65t
Technical specifications for each part:
1. Casting Machine
A. Diameter of crystallization wheel 1500mm
B. Cross section of crystallization wheel 2420mm2
C. Cross section of casting ingot 2420mm2