Grey And Blue Advance Ultrasonic Industrial Humidifier With16 Ltrs. Water Tank Capacity

Bullets :-
Model : AIHUG060Z
Colour : White and Blue
Material : GI Powder Coated
Power Source : Corded Electric
Capacity : 10 Ltrs. / Hour
GI powder coated components ensure corrosion free performance
Negligible maintenance, simplified even further due to portability of unit.
Humidity Indicator & Intelligent controller, Size of water mist 1-6, Independent Humidification System
Lowest energy consumption in its category. No condensation due to very fine water particle size
No Structural modifications required. Easy to install
The droplet diameter is very small, only 1-5um
Uniformity humidification, the maximum humidity up to 99%
Using integrated ultrasonic atomizer, can change the atomizing piece, be convenient to maintain.
1 Year warranty against any manufacturing defect



Technical Details:

Evaporation : 10 Litres / Hour
Stainless Steel Body Operating Load : 600 W
Power supply : 220-240 VAC/50 Hz
Water Capacity : 16 Litres
Air Volume : 350m2/h
Atomizing Capacity : 30-50 ml/min
Area Coverage : 800 - 1000 Sq. ft. H : 10-12 ft.
Work Temperature : 5-40 C
Humidity control : 10% - 95%
Control precision : A 3%RH
Control mode : Automatically control, humidity display
Way of water : In automatic
Control : Humidity/time
Water Quality Required : Pure RO water
Cleaning Frequency : Once in a week

Product Description

Advance Ultrasonic Industrial Humidifier utilizes ultrasonic oscillator to the water surface under the action of capitation, form ultrafine particles with the diameter less than 10 um so that the water spray to form a more balanced humidity field mist particles, and the flow of air to heat exchange, to achieve the purpose of increasing humidity.

Using integrated ultrasonic atomizer, can change the atomizing piece, be convenient to maintain.

*The droplet diameter is very small, only 1-5um.
*Uniformity humidification, the maximum humidity up to 99%.
Operating Instruction
1) First put the machine on flat ground, insert the air pipe;
2) Check the drainage valve is close;
3) Plug into power supply with the power line enclosed machine, the fan will work and start or
Water;
4) If you want to water by hand, open the upper water tank, water inside an stop when the
light on panel be red;
5) If you want to tap water, use the flexible pipe to connect tap, open the tap, when water
6) reach the limited level , it will stop by the control of floating ball;
7) Setting the controller (flow the instruction of controller above), the machine start to work
When the current environment humidity below the low limit you set, and it makes fog when
Water reach the limited level;
8) Fog will stop when the current environment humidity above the upper limit you set;
9) Do not ruck machine wildly during working.
FILTER INSTALLATION
In order to keep the machine water system running smoothly, and to prevent the water
Impurities flowing info machine blocking the solenoid valve and fogging system, be sure to install a
Water filter less than 5 m away in front of water pipe junction make sure the joint does not leak,
Every connected parts and hose required the quality and rust proof material, and it is advisable to
Install the machine by a professional plumber. Make sure to drain all of the pollution and impurities and then connect to the machine pipe, the inner diameter of this equipment pipe joint is 20, it adopts outer thread interface, when the interface connected with each other, make sure it is water or air tight; it is suggested to be installed by professional plumber
Note: When installation or running the machine, the height of water level of pipe can not be higher than the outlet.