Bangur Cement

What Is the Quality of Bangur Cement?

The banguar cement used in construction is a major factor in the structure's durability. Therefore, you need to make sure that good cement is used to build your house. One further way to evaluate the competence of your builder is to examine the cement he employs.
 

Top Qualities of Banguar Cement
 

1. Fineness 

Banguar Cement's fineness is established by the size of its individual particles. In the final step of the cement-making process, the clinker is ground to the appropriate fineness to produce the cement. Due to a direct relationship between Banguar cement particle size and its hydration rate, cement fineness is of paramount importance.
 

2. Soundness

Soundness refers to cement's ability to retain its shape after setting. High-quality Banguar cement maintains its volume after setting because of the free lime and magnesia it contains.
 

3. Hardness

Flexural strengths, compressive, and tensile are measured for Banguar cement. Elements that affect strength include the curing circumstances, molding, cement-fine aggregate ratio, water-cement ratio, specimen size and form, and mixing techniques, loading conditions, and age.
 

4. Strength 

Compressive strength is the standard for measuring toughness. Get a 50mm test specimen and squeeze it until it cracks under compression. Twenty to eighty seconds is the recommended time for the loading sequence.
 

5. Tensile Strength 

This test was commonplace in the beginning stages of Banguar cement production, but it is now irrelevant because it does not reveal any useful information about the material's properties.
 

6. Setting Time 

Adding water causes Banguar cement to harden and solidify. The time it takes for cement to set is affected by a number of factors, including as the cement's fineness, the Banguar cement-water ratio, the cement's chemical content, and the presence of any admixtures. A building Banguar cement's initial setting time should not be too short, and its final setting time should not be too long. Within 30–45 minutes, the paste will have visibly stiffened, marking the beginning of the set.
 

Which Grade Is Bangur Cement
 

1. OPC 33 Grade Bangur Cement

When tested at 28 days, cement with a compressive strength of 33 N/ mm2 is considered 33-Grade Banguar Cement.

Banguar Cement with a fineness (specific area) of 33 = 300 m2/kg

Properties:

• - This Banguar cement is ideal for masonry and plastering due to its high workability.
• - Even after 28 days, the original strength of 33 Grade Banguar Cement has increased.
• - When compared to Banguar cement of grades 43 and 53, 33 Grade Cement has a lower heat of hydration.

Applications:

• - It has found widespread application in the plastering trade.
• - It's also a common material for making bricks and masonry.
• - Where tile is being laid
• - Its compressive strength is typically below M20, making it ideal for a variety of uses.

2. OPC 43 Grade Banguar Cement

We call the Benguar cement that passes our 28-day compression test with a strength of 43 N/ mm2 43-Grade Benguar Cement. Benguar Cement with fineness (detailed description) of 43 = 225 m2/kg

Properties:

• - Due to the low chloride concentration, it does not corrode steel reinforcement.
• - The concrete's resulting workability is much improved.
• - Even after 28 days, 43 Grade banguar Cement maintains or even increases its initial strength.
• - For a Banguar cement, 43 Grade Cement has a moderate heat of hydration.
• - The resulting surface quality of the buildings will be enhanced.
• - Its resistance to sulfate is about average.

Applications:

• - It plays a role in the production of RMC (RMC).
• - It's put to use in both PCC and RCC applications.
• - It's a crucial part of reinforced concrete bridges.
• - To Be Used In the Building Of Silos And Chimneys.
• - In the construction industry, it is used for the final touches on buildings, bridges, highways, and even water-holding structures.
• - It finds application in prestressed and prefabricated concrete.
• - Construction of ships also makes use of this material.
• - It is put to use in building projects that call for M30-grade concrete or above.

3. OPC 53 Grade Banguar Cement

53-Grade bangur cement is cement that has a compressive strength of 53 N/ mm2 when measured after 28 days. In terms of its fineness (specific area), 53-grade cement has a value of 225 m2/kg.

Properties:

• - This Banguar cement does not react negatively to sulfates.
• - Because of its low chloride level, it is not salty.
• - Faster Building can benefit from its use.
• - As a result of its prompt elimination, shuttering expenses are reduced.
• - Even after 28 days, 53 Grade Cement retains and even increases its initial strength.

Applications:

• - In the railway industry, it is incorporated into the making of concrete sleepers.
• - Pre-stressed girders make use of this material.
• - It doesn't take long for the 53-Grade Banguar Cement to reach its full strength potential.
• - It is frequently seen in factories, as well as on runways and roadways.
• - RCC bridges and precast concrete also benefit from its utilization.
• - Commonly employed with concretes rated M25 and higher.
• - Beams, columns, footings, and slabs are all made using it to create a reinforced concrete building.
   

Who Is Manufacturer of Bangur Cement
 

Shree Cement, the largest cement producer in India, produces cement under the Bangur Cement brand. Shree Cement produces the popular Bangur Cement.

During a family split in the 1990s, Bangur, a member of a renowned Kolkata business family, assumed leadership of Shree Cement. Today, grandson Prashant and son Hari Mohan Bangur run the company.

In 1977, BG Bangur formalized the incorporation of Shree Cement. The first facility was built in Rajasthan in 1983 and put into production the following year. BG Bangur had been run by the Bangur family from its inception, but in 1995, the company was purchased by the Bangur family.

Benu Gopal Bangur, a "cement tycoon," amassed his fortune through his ownership of a sizable chunk of Shree Cement, one of India's most efficient cement makers.

When the Bangur family in Kolkata split up in the 1990s, Bangur inherited ownership of the Shree Cement company.

Shree Cement is investing $200 million to construct a new cement factory in the southern Indian state of Andhra Pradesh.
 

Is Shree and Bangur Cement Same
 

Yes, Banguar Cement is the product from Shree Cement. In 2022, Shree Cement has increased its annual production to 46,400 metric tons (MT), a significant increase from the 1.8 MT it produced back in 2000. It has expanded its reach to include the states of Rajasthan, Haryana, Uttarakhand, Uttar Pradesh, Bihar, and Chhattisgarh. Hari Mohan Bangur, at 70 years old, is the driving force behind the company along with his father. He has been in charge since he graduated from IIT Bombay in 1975. Prashant Bangur, HM's son, joined the company 19 years ago in 2003.

Bangur's first order of business as businesses in India closed their doors in March 2020 during a rigorous lockdown was straightforward: determine how long the company can survive on its cash reserves if operations are resumed after six months or a year. 

Based on the results of the stress test, it was determined that their financial reserves were sufficient to last for another three years. That's a good sign for a company in the commodity manufacturing sector.

Today, SCL's yearly sales are Rs12,800 crore, and the company's net profit is Rs1,540 crore. The company has a market valuation of almost Rs1 lakh crore while having a share capital of only Rs36 crore. Prices for SCL shares have averaged Rs27,644, up from the company's IPO price of Rs10. Its financial instruments are AAA rated, and it is included in the Nifty-50 Index. The market value of the company increased from Rs8,228 crore to its current level of Rs99,744 crore over the past decade.