Elastomeric Membrane

MOQ50 Kilograms/Kilograms

FeaturesWaterproof

Usage & Applicationsindustrial

Surface TreatmentColour coated

TypeLiquid Membrane

Size4 L

MOQ50 Kilograms/Kilograms

Grade StandardIndustrial Grade

ColorBlack

Usage & ApplicationsRoof Waterproofing, Terrace, Slab, Balcony, Podium, Concrete, Masonry surfaces

Flash Point>100AdegC

Purity>98%

Water Absorption<1%

MOQ10 Unit/Units

UsageIndustrial

GradeWaterproofing

AppearanceLiquid

Place of OriginIndia

Product TypeAcrylic Elastomeric Membrane

ApplicationIndustrial, Construction

MOQ20 Container/Containers

ApplicationASCOFLEX SUPER is pre-mixed and ready to use. ASCOFLEX SUPER may be applied by brush or paint roller. Prior to applying to general surface area, pre-treat all cracks, joints, corners and coves first, by applying a generous coat of ASCOFLEX SUPER approximately 10 cm (4aEUR) to each side of joint or surface. Allow to dry to the touch and then apply a second coat of ASCOFLEX SUPER to same area, again allowing to dry. Once pre-treated areas are dry, apply a generous coat of ASCOFLEX SUPER to entire surface, included pre-treated cracks, joints, and coves, and allow to dry. DO NOT skimp on initial coat of ASCOFLEX SUPER. Allow to dry to the touch, before applying a final coat to entire surface. Final dry thickness of first and second coats should be a minimum of 0.5 aEUR" 0.75 mm. Inspect entire area and, if required, reapply on required areas, and allow it to dry.

Product TypeWater Proofing & Tile Fixing

UsageFor long-lasting waterproofing.

Feature1) Excellent adhesion 2) Easy to use 3) Highly flexible 4) Anti-root properties 5) Crack bridging 6) Can be applied to the interior and exterior surface

MOQAny Order Liter/Liters

UsageTerrace,Walls, Roof

PurityHigh

ColorWhite

GradeChemical Grade

Physical FormLiquid

Chemical NameRainseal

MOQ10 Kilograms/Kilograms

Place of OriginIndore MP

Purity99.9%

AppearanceWhite

Product TypeWaterproofing Chemical

GradeChemical Grade

Ph Level9-10

MOQANY Kilograms/Kilograms

ApplicationConstruction

Product Typewaterproofing coat, terrace waterproof coating

UsageWaterproofing

TypeWaterproof Membrane

MaterialPolymer

MaterialSBS modified bitumen

Dimensions3.0x10, 4.0x10

ThicknessVariable

WeightVariable

Tensile StrengthHigh

ElongationHigh

Base MaterialUrethane

Application MethodBrush/Spray

UV ResistanceExcellent

Solids ContentHigh

ASTM ComplianceD836-05

Film Thickness2-3 mm

MaterialsElastomer

SizesFull range

StylesPlate and Frame

OptionsWash/Non-wash

ApplicationHigh pressure

TypeDetachable

MaterialModified Bitumen

Width2m

Thickness3mm

LengthVariable

Weight10kg/m²

Tensile Strength2.5Mpa

MaterialElastomer

Diameter12 Inches

Thickness0.25 Inches

Hardness70 Shore A

Tensile Strength500 Psi

Elongation300%

MOQ10 Piece/Pieces

TypeWaterproof Membrane

MaterialAcrylic co-polymer

Packaging20 Ltr (25 Kgs)

DeliveryWithin 3 days

Item CodeMembranecoating

ComponentSingle

ApplicationCoating

MOQ1 , Liter/Liters

Product TypeWaterproofing Chemical

Size20 kg

Usagewaterproofing