Nc Putty By Arko Paint And Resin Co.

We are counted among the trusted manufacturers of NC Putty to our highly reputed clients. They are used at various places as body filler as per our customers requirements. Supreme quality raw material is used in its making at our unit as per the industrial set standards and norms. NC Putty is thoroughly tested on various parameters to make sure that it is flawless. It hence stands high on leak proof, effectiveness, durability, performance, safety, simple usage and easy application.Features: Precisely Made Safely Packed Durable Quality Highly effective Description: ARKO Nitrocellulose Putty based on nitrocellulose resin one-component quick drying with good adhesion properties on many substrates, used to fill surface imperfections such as scratch marks and pinholes in car and commercial vehicle. It is easy to apply and easy to sand. Compared to standard paints and varnishes and related standard test methods.Products: POLYONE Cellulosic puttyARKO Cellulosic putty Packaging: 0.5 kg1 litTypical Substrates: Origional finishes including thermoplastic acrylics2K PrimerHardened sanded paintworkSanded primed surfacesTechnical Specifications Appearance Putty Color Grey, Red Viscosity 150, 000 cps Specific Gravity 1.3-1.5 Solubility Insoluble in water Volume Solids 65 75 Pot Life N/A Shore D Hardness N/A Catalist Required N/A Flash Point 4oC Shelf life 24 months VOC (EC) 433.5 g/l Precaution: Read all direction and warnings prior to using Arko products Material Safety Data Sheet (SDS) Application Data Cleaning Prior to commencing any sanding work, thoroughly cleanse the surface of any grease or wax. Apply using two clean cloths in a wipe-on, wipe-off process. Preparation Dry sanding Sand with P280 grit dry Sanded systems P80 P180 After sanding work is completed and just prior to the application of primer, degrease Mixing ratio (by volume) Ready to use Number of coats Apply one to three thin coats as necessary. Always apply a thin initial coat to fill minor holes and scratch marks. Extra thin layers can be applied with an interval of 15 mins. Apply with a rubber squeegee or a metal spreader. Air Dry Surface Dry : 20min at 25oC Hard Dry : 60 min at 25oC Between coats 10 min at 25oC Sanding Dry sand with P 400 to P 500 grit paper. P 600 to P 800 grit wet Recoatability Arko basecoat or topcoat can be applied directly over Arko NC putty after 24 hours without any shrinkage and cracking. Storage: Store the product dry and at a temperature between 5 and 38oC per Arko specification. Store in the origional unopened container. Storage temperature may vary per OEM specification requirements refer to container label for specific life information.Disclaimer: The information supplied in this document is for guidance and should not be constructed as warranty. All implied warranties are expressly disclaimed. All users of the materials are responsible for assuring that it is suitable for their needs, environment and use. All data subject to change as Arko deems appropriate.