We are instrumental in providing to our valuable customers excellent quality E3 to Ethernet Converter which is available with following Features:-\015\012* Support 4x10/100Base-Tx FE over 1xE3/DS3 channel;\015\012* Customer should offer E3 or DS3 separately, E3 and DS3 cannot be supported imultaneou

Our firm is manufacturing and supplying Twoi Channel Serial To Ethernet Converter to our customers in Shanghai, Shanghai, China. The Serial server can implement the conversion between 2channel RS232/RS485/RS422 serial ports and 10/100M Ethernet ports, and two models are available: complete machine

Type : 2 Ethernet Over 2E1 Convergency Converter RJ45 interface supports AUTO-MDIX. support 75ohm/120ohm adapt ; Line Rate : 2.048Mbps50ppm Line Code : HDB3 Interface Standard : ITU-T G.703 E1 Impedance : 75(unbalance) and 120(balance) Connections : dual coax BNC and 120-ohm twisted-pair (RJ45) Jitt

Ethernet to V.35 converter is a good performance, self-study long-distance Ethernet bridge. It is of small volume and low cost and is very suitable for connection application which needs low cost equipment. It can be also used as an extender of LAN.\015\012PRODUCT CHARACTERISTIC\015\012completely co

We are delivering E1 G.703 to V.35 and 10/100BaseT Ethernet Converter to our highly valued consumers. This can realize V.35 and 10/100BaseT Ethernet transmit over E1 G.703 network.The interface mode of V35 data is DCE, which can be connected with DTE of DCE equipment; Ethernet interface 10/100M, hal

We are instrumental in providing to our valuable customers excellent quality Ethernet Over Coax Adapter Slave Unit which is available with following Function Features:-\015\012* Low frequency modulated eoc slave, use INT6400 chipset, HomePlug AV solution.\015\012* Work on low frequency 7.5-30MHz, wi

Our offered 2 E1 Timeslot ADD/DROP to Ethernet Converter can extract partial time-slots from E1 channel to implement multiplexing transmission of 1/2/4/8 channel(s) of RS232/RS422/RS485 serial port data or Ethernet data, and the equipment can construct chain network by cascade connection, and the ce

Type : Framed E1 to 4 10/100BaseT Ethernet Converter With Enhanced Management Line Rate : framing : N*64Kbps N=0~31; Unframing : 2.048Mbps Line Code : HDB3 Interface Standard : ITU-T G.703 Number of Ports : 4 Compliance : Relevant Sections of IEEE 802.3 Max Frame Size : 2047 Bytes Connector and Elec

Our offered E1 to Ethernet and RS232 Converter could Plugging directly into the 10/100Base-T port of a hub or LAN switch, the E1 to Ethernet converter provides FE1 access at connection data rates of 2.048 Mbps, or nx64 (n=1 to 32 channels). The E1 to Ethernet and RS232 converter is an excellent ch

Type : DS3, E3 to Ethernet Converter Condition : New Model : DS3, E3 Features : Support 4*10/100Base-Tx ethernet over 1~2 E3/DS3 channel; Automatically restrain broadcast storm; Rich alarm indications such as E3/DS3 AIS/LOS, ETH LINK/ACT etc; Ethernet ports support 10/100M half/full duplex auto-adap

Our offered 4 Fast Ethernet +8 Voice POTS(FXO/FXS)+1 RS232 over E1/G.703 Multiplexer can provides 4*10(100)BaseT+8*voice +1 RS232 over E1 converter. The 8 voice POTS (FXO/FXS) over E1/G.703 multiplexer realize the long-distance extend of telephone line through E1 channel. It is small size, low cos

Type : E1 to 4 10, 100 Base T Ethernet Converter With Local Management Condition : New Application : E1 to Ethernet LED Indicator : Required

We are instrumental in trading a qualitative range of Ethernet Converter including E3 to Ethernet Converter, Twoi Channel Serial To Ethernet Converter, 2 Ethernet Over 2E1 Convergency Converter Dimension(L*W*H): 210 (L) 140 (W) 30 (H) Millimeter (Mm) etc.

Shanghai Baudcom Communication Device Co.,ltd. - Exporter of Ethernet Converter, Front Mount Balun Panel (16 E1 Coax To Rj45), Serial To Ethernet Converter from Shanghai, Shanghai, China.

Shanghai Baudcom Communication Device Co.,ltd. - Ethernet Converter (26)

All Categories

E3 to Ethernet Converter

Twoi Channel Serial To Ethernet Converter

2 Ethernet Over 2E1 Convergency Converter Dimension(LWH): 210 (L) 140 (W) 30 (H) Millimeter (Mm)

Ethernet To V.35 Converter

E1 G.703 to V.35 and 10/100BaseT Ethernet Converter - 100x150x40 mm, 10/100 Mbps Ethernet, V.35 DCE Interface, VLAN Support

Ethernet Over Coax Adapter Slave Unit

2 E1 Timeslot ADD/DROP to Ethernet Converter

Framed E1 to 4 10/100BaseT Ethernet Converter With Enhanced Management

E1 to Ethernet and RS232 Converter

DS3, E3 to Ethernet Converter - New Model with 4*10/100Base-Tx Support | Plug-and-Play, Broadcast Storm Restraint, Rich Alarm Indications

4 Fast Ethernet +8 Voice POTS(FXO/FXS)+1 RS232 over E1/G.703 Multiplexer

E1 to 4 10/100 Base T Ethernet Converter - New with Local Management | Required LED Indicator for Industrial and Laboratory Use