Switching Power Supplies By Fairone Electronics

Following are the Main Specifications of Switching Power Supplies :-
Input
01 Input Voltage Range 90 va 264 v
02 Nominal Input Voltage 100v a 240v
03 Input Current (Max.) 0.2A
04 Switching Frequency 50-60KHz (Typical) Any line and any load.

Output
01 Output Voltage (nom.) 6v Any line and 400mA load
02 Output Current (nom.) 1000mA Any line
03 Float Output Voltage 6.8-7.2Vdc (RED LED ON) At<0.2A load
04 Bulk charge mode Voltage 3.0A 6.8 (RED LED OFF) At >0.2A load
05 Output Current 1-0.15A Any Line
06 Maximum Output Power 8 w At rating load and any line
07 Efficiency (Typ.) a Y80% At nominal load
08 Charging Voltage 3.0v~7.5v any line, Trigger Point 100mA
09 Line Regulation 5% At every load division and any
line input
10 Load Regulation 5% At every load division and any
line input
11 Output Cable L=1800mm Plug Size: 2.1x5.5x12 Center (-)
12 Input Connector Interchange Plug EU
Environmental
01 Operating Temperature 0 ~ +40C Full load & natural convection
02 Storage Temperature -10 ~ +70C -
03 Operating Humidity 10 ~ 90%RH -
04 Storage Humidity 5 ~ 90%RH Relative humidity,
non-condensing
Safety Standard & EMI
01 Withstand Voltage (Hi-Pot) KVac I/P to O/P: 3.0 (60Sec.) -
02 Safety Standard EN60335-2-29 -
03 EMI/RFI Standard EN55022B/FCC -
Mechanical Characteristics
01 Size 80x49.5x35.5mm (L*W*H) Casing Only
02 Weight Approx. -
Mechanical Characteristics
01 Size mm 75.7*47.5*31mm (L*W*H) Casing Only
02 Weight g A