Indian Stainless Steel Cut Wire Shot

With rich experience and industrial knowledge, we have been constantly involved in offering an assorted range of Stainless Steel Cut Wire Shot. The provided cut wire shot is manufactured with utmost precision using superlative quality stainless steel wires with the help of sophisticated technology as per industry standards. The offered cut wire shot is specifically designed for cleaning, casting, forging, sand removal and other allied applications during different kinds of finishing kinds over components and surfaces. As per the varied demands of clients, we offer this Stainless Steel Cut Wire Shot in various shapes, sizes and finishes at marginal prices. Features: Suitable for ferrous as well as non-ferrous metal parts Efficient and faster cleaning applications Cuts down the maintenance cost of shot blasting machine No dust or health hazard during operations td p { margin-bottom: 0cm; }p { margin-bottom: 0.21cm; } Stainless Steel Cut Wire Shots Chemical Composition And Hardness According To Grade SS C Mn P S Si Cr Ni Hardness Grade Min-Max % Min-Max % Max % Max % Max % Min-Max % Min-Max % Min-Max HRC 202 0.15 7-10 0.075 0.03 1 17.0-19.0 4 50-55 302 0.15 2 0.045 0.03 1 17.0-19.0 8.-10 48-53 304 0.08 2 0.045 0.03 1 18.0-20.0 8.-10 48-53 430 0.03 1 0.04 0.03 1 16.0-18.0 Nil 38-43 Available Cut wire shot equivalent Sizes in mm, inch Cast Steel shot size IS SiEVE Designation Cut Wire Shot in inches Cut Wire Shot In mm (Mean Size) Limits for Diameter and Cut Length (mm) Grit Size SAE J441 Shot Desig. and Size IS: 5873-1970 Shot Size Desig. IS:4606-1983 Shot Size and Desig. S-170 424-um 0.017 0.4 0.3-0.5 G-50 S-S425 S-190 500-um 0.02 0.5 0.35-0.65 G-40 CW-20 S-CW50 S-S600 S-230 600-um 0.023 0.6 0.45-0.75 G-40 CW-23 S-CW60 S-S710 S-280 710-um 0.028 0.7 0.55-0.85 G-25 CW-28 S-CW71 S-S850 S-330 850-um 0.032 0.8 0.65-0.95 G-25 CW-32 S-CW80 S-360 0.035 0.9 0.75-1.10 G-18 CW-35 S-CW90 S-390 1.00mm 0.041 1 0.8-1.2 G-18 CW-41 S-CW106 S-S1000 S-460 1.18mm 0.047 1.2 01-1.4 G-16 CW-47 S-CW118 S-S1180 S-550 1.40mm 0.054 1.4 1.2-1.60 G-17 CW-54 S-CW135 S-S1400 S-660 1.70mm 0.062 1.6 1.4-1.8 G-12 CW-62 S-CW160 S-S1700 S-780 2mm 0.08 2 1.7-2.30 G-10 S-S2000 General Information of Shots Specification Grain shape Material Density 7.7g/cm3 Hardness HRC Hardness Vicker Packing SAE- J441 AS-Cut Cylindrical SS 202302304 25-40 25 Kg HDPE Bag IS:5873-1970 Nor. Conditioned Carbon Type 1070 45-50 450-510 AMS-2431 Conditioned High carbon Type 1070 50-55 520-590 VDF-8001 Almost Spherical Aluminum Type 4043 55-60 600-670 58-63 640-670 ADVANTAGES OF STAINLESS STEEL CUT WIRE SHOTS Cost effective and low consumption Consistency in shape, size and hardness Cleans the product faster Available in varied size as per requirement It increases the fatigue life of blasted components Longer life till reduced to smallest particles There is no possibility of dust formation during shot blasting Helps in cutting down maintenance cost of the shot blasting machine Assurance of no dust/ health hazard during operations Applications of Cut Wire Shot :                                    Blast Cleaning Rust Removal Shot Peening Shot Blasting Shot Polishing Grit Removal Pre Treatment                                    Surface Finishing                                    Why To Use Cut Wire Shot :                                    No Blow Holes, Porosity, Shrinkage                                    No Dust Generation                                    Environment Friendly                                    Reduced Time for shot Blasting/ Peening                                    Consumption Decreases 3-4 times less to Cast Shot                                    Lower Enventry Required for the Same Job                                    Lower Operation Cost                                    All Shot Being Made Out Of Same Wire Are Identical, No Variation of size anywhere                                    Uniform Hardness Throughout                                    Due To Drawing Passes Grain Size Is Stablized                                    Lower Maintenance of machine Due To Absence Of Abrasive Dust                              Micro-Structure is only Tempered martensite