Ptfe Molding Powder For Sheet Rod

Our company is leading name in supplying and exporting of PTFE Molding Powder For Sheet Rod with the following details:
1 Smoothness and Cleaness : Clean & white surface, even texture, no foreign matters, D=57mm,no color difference for rod color cross-sectionClean & white surface, even texture, no metal residue, residue quantity : (a 1mm)a 2
2 Tensile Strength (MPa)a Y : 2725.5
3 Elongation at Rupture %,a Y : 250
4 Volume Density (g/L) : 500A 100
5 Average Grain, (um) : 180A 80
6 Moisture Content%,a : 0.04
7 Melting Point : 327A 5
8 Standard Relative Density : 2.130-2.160
9 Thermal Instability Index,a : 20
10 Electrical Strength,(KV/mm)a Y60----------------
11 For checkExecute according to requirement of HG/T3028-1999
12 For processMolding
13 UsageThe resin can be processed to film, sheet, rob, gasket, bearing and presintered material
14 Packing,Storage,Transportation1.PTFE is packed in double layer PVC bags inside and in hard circular barrels outside .On the barrel, there should be attached label and quality certificate,on which there are brand, trademark,executive criterion,type,grade, lot No. and net content, pack date, checker, packager
2.PTFE should be stored in clean dry warehouse to prevent from dust, moisture,etc,foreign matters.
3.The product are transported according to non-dangerous products. Heat, moisture, freezing and strong shock should be avoided during transportation. Over-bumpiness and compression is adapt to make the resin bind together.