Metallized Film For Capacitor Use By Tongling Tongfei Technology Co., Ltd.

We are offering our customers a wide range of Metallized Film for Capacitor Use, which are available following Specifications :-
Cores
Material: Plastic
Width: Film Slit Width According to the customers demand

Inner Diameter: According to the customers demand
* Roll Outer Diameter:
For slit widths 4.0mm up: 155 mm (with certain deviation)
For slit widths 10.0mm up: 180 mm (with certain deviation)
For slit widths 25.0mm up: 240 mm (with certain deviation)
* Rolls:
Film is wound on solid cores, with the metalized layer inside.
Rolls are wound up to the specific outer diameter.
The loose end of film is held in place by a closing sticker.
Rolls are always packed in pairs.
There is plastic foam between the rolls to protect the electrode side.
Packing:
Inner:
The piled rolls are packed in plastic bag and heat sealed with desiccants after vacuum removal.
Labels inside the bags mark film type, thickness, width, free margin width and resistance.
Outer:
The bags are packed in carton cases.
The carton cases are packed in wooden cases or reinforced carton.
* Storage:
1. Film should be stored in its original packing until use. The temperature should be controlled to 5 ~ 35a and humidity less than 85%RH.
2. On exposure to moisture, the thin metalized layer is likely to be easily oxidized. Therefore, after the packing is opened, the rolls should be used as soon as possible.
3. It is recommended that the opened rolls be stored in temperature conditions of 15~25a