Cementitious Waterproofing (Crystallization) Chemical

Our customers can avail from us Cementitious Waterproofing (Crystallization) Chemical. Greenseal 300 is a cement based waterproofer for mortar consistency used in making coves and filling reglets. Our Cementitious Waterproofing (Crystallization) Chemical is used in conjunction with Greenseal 200.

Details of Cementitious Waterproofing (Crystallization) Chemical:
Surface:
Surfaces must be clean and free from oil, dust, paint and laitence. Apply to routed out cracks, honeycombing, construction joints and reglets after application of Greenseal 200 bonding coat. If repairs are deep, install Greenseal 300 mortar in layers applying Greenseal 200 slurry in between each mortar layer.

Mixing:
Mix Greenseal 200 and 300 (1:4) dry and add enough water to make stiff mortar consistency. Mix only enough to be used in 15 minutes.

Application:
See Greenseal literature for application quantities.

Curing:
All Greenseal products must be moisture cured for a minimum of two days after installation. Protect from drying out too quickly and from rain, frost and wind.

Note:
Rubber gloves must be worn when in direct contact with Greenseal materials. If material gets into eyes, flush immediately with clean water and repeat until irritation ceases. Use goggles to protect eyes. Clean eyes after use.