Bitumen Emulsion Plant (Uvb-1)

We are engaged in exporting and supplying an excellent quality Bitumen Emulsion Plant (UVB-1) in Poltava, Poltavs'ka, Ukraine.
Installation bitumen grade UVB-1 is designed to produce both anionic and cationic bitumen emulsions, which are used in road construction :
for tack of the old pavement before applying them on asphalt ;
to prepare cold asphalt mixes ;
for the surface treatment of road surfaces ;
Device for thin coatings of protective layers ;
for patching roads etc.

Parameter Value:-
* Maximum performance (including preparation time), m3/1hr
* Consumption of bitumen (penetration at 90 to 130), not less than m3/hr0.97
* Water flow m3/hr 0.6 to 0.7 *
* Flow breaker ( with penetration bitumen below 90 ), dm3/hr 0 to 50 *
* Fuel acid dm3/hr 1 to 20 *
* Consumption emulsifier dm3/hr 1 to 20 *
* Consumption of adhesive additives dm3/hr 1 to 20 *
* Pressure bitumen at plant inlet, max 0.2 MPa
* Bitumen feed pressure to the mixer, 14 to 16 MPa
* The pressure of the aqueous phase supplied to the mixer, 0.2 MPa
* Temperature of bitumen entering the unit, 140-160 CA
* Temperature of the water entering the plant , 40-60 CA
* Lift height of the emulsion after installation (m) is not more than 15
* Installed capacity not more than 17 kW
* voltage power circuits at 50Hz, 380
* compressed air pressure , bar 4 ... 6
* Airflow, dm3/min 100
* Dimensions, mm , not more:
* length 2250
* width 1750
* Height - 1840
* Weight, kg 1050