Battery Charger(12v 10amp)

 Battery Charger(12V 10Amp) Linkwell Digital Chargers are designed for precise charging of Lead acid, sealed maintenance free Batteries. These batteries require a sophisticated charger to charge them in a precisely regulated fashion specified by the battery manufacturer to avoid irreversible damage through gassing and shortened service life. These automatic chargers deliver a measured constant current to the battery until the manufacturers specified maximum battery voltage is attained. This voltage is then held constant for a specified period to allow uniform charge across all the plates. The charger may be left connected indefinitely to a fully charged battery without the fear of over charge or damage.   SPECIAL FEATURES      Advanced high frequency SMPS design charger.    Suitable for charging wide w:st="on"Battery Range    Automatic current selection as per Battery Capacity.    Wide range of AC input (90V 290 VAC)    Latest Battery charge algorithms for quick and accurate charging                 increases battery life.    Protection provided for Output Reverse Polarity & Output Short Circuit PRODUCT SPECIFICATION w:st="on"Input Voltage Range Max O/p Power O/p Voltage O/p Current Combined Regulation 90~290 Volt 150 Watt 13.8 +/-0.2 V dc 10.5 to 11 A dc +/- 0.2 V   INPUT CHARACTERISTICS Sr.No. Description Specification Remark 01 Input voltage range 90 to 290 V ac Single Phase 02 AC input frequency 47 to 63 Hz 03 Maximum I/p Current 2.9A Vin=90Vac, rated load   OUTPUT CHARACTERISTICS Sr.No. Description Specification Remark 01 Fast charge voltage 14.0+/-0.2Vdc   02 Floating voltage 13.8Vdc   03 Constant current 10A   04 Power efficiency 80% Vin=220 Vac, rated load 05 Output inhibit voltage 13.7~14.0V For charging Lead Acid Battery 06         PROTECTION FEATURES Sr.No. Description Specification Remark 01 Over voltage protection The charger limits the maximum output voltage to a level suitable for the connected battery bank   02 Thermal protection 62.5Deg. Cen Junction to ambient 03 Current limiting protection 11Amp At CC mode 04 Short circuit protection Short circuit protection should be automatically recover after removal of the condition   05 Battery Reverse Polarity protection Short circuit protection should be automatically recover after removal of the condition     CHRGING INDICTOR Sr.No. Description Status Remark 01 Power on LED1: Green   02 Charging LED2: Red   03 Fully Charged/Battery NC LED3: Green   04 Rev.Polarity LED4: Red