Polyurethane Membrane

MaterialHDPE

Thickness2mm-6mm

Width5m-8m

Tensile Strength1000N/5cm

UV ResistanceExcellent

UsageCanal lining and water containment

MOQ100 Square Feet

FormSolid

UsageCivil Construction, Wall Finishing, Electrical Conduit Chasing

FeaturesGood Quality

Product TypeELASTOBOND PMB

Surface TreatmentSmooth

FeatureRust-resistant

MOQ100 Liter/Liters

Packaging Size15 leter

PurityHigh

Chemical FormWaterproofing

Usage & ApplicationsWaterproofing

Colorgrey

Materialwaterfrooing

MOQ100 Roll/Rolls

Chemical FormChemical Grade

ColorBlack

PurityHigh

Usage & ApplicationsWaterproofing

TypeWaterproof Membrane

MaterialPolymer Bitumen

MOQ2000 Kilograms/Kilograms

Usage & ApplicationsConstruction Use

Packaging Size20 KG

Purity100%

Chemical FormLiquid

TypeWaterproof Membrane

MaterialAcrylic

MOQ10 Unit/Units

UsageIndustrial

AppearanceLiquid

ApplicationIndustrial, Construction

Product TypeHighly Elastomeric Polyurethane Based Waterproofing Membrane

GradeWaterproofing

MOQ50 Kilograms/Kilograms

ColorBlack

TypeWaterproof Membrane

MaterialLiquid Membrane Chemical

MOQ100 Piece/Pieces

Thickness1.5 mm to 3 mm (applied thickness)

FormLiquid

ColorGrey or as required

Machines TypeApplication by Brush, Roller or Spray

ApplicationTerraces, Roofs, Basements, Water Tanks, Podium Decks

Installation TypeCold Application

MOQ99 Kilograms/Kilograms

Place of OriginIndia

Ph LevelNormal

ApplicationFor construction

Purity80-99%

GradeIndustrial grade

MOQ1 Unit/Units

ColorGreen

MaterialPlastic

ThicknessAs per available Millimeter (mm)

WidthAs per available Inch (in)

LengthAs per available Inch (in)

MOQ20 Container/Containers

ApplicationASCOSHIELD PU is pre-mixed and ready to use. ASCOSHIELD PU may be applied by brush or paint roller. Prior to applying to general surface area, pre-treat all cracks, joints, corners and coves first, by applying a generous coat of ASCOSHIELD PU approximately 10 cm (4aEUR) to each side of joint or surface. Allow to dry to the touch and then apply a second coat of ASCOSHIELD PU to same area, again allowing to dry. Once pre-treated areas are dry, apply a generous coat of ASCOSHIELD PU to entire surface, included pre-treated cracks, joints, and coves, and allow to dry. DO NOT skimp on initial coat of ASCOSHIELD PU. Allow to dry to the touch, before applying a final coat to entire surface. Final dry thickness of first and second coats should be a minimum of 0.5 aEUR" 0.75 mm. Inspect entire area and, if required, reapply on required areas, and allow it to dry.

Product TypeWaterProofing & Tile Fixing

Surface TreatmentBlocks, Brick, Concrete, Renders etc.

Feature1) Excellent adhesion & highly elastic 2) UV resistant 3) Anti-root properties 4) Excellent crack-bridging 5) Excellent waterproofing 6) Easy & economical application

TypeWaterproof Membrane

MaterialPolymer