Corona Treater Station (4 Kw)

1. CORONA TREATER: In corona treatment, the film is passed over the roller through the air gap between the fixed electrode and the dielectric whereby the film is exposed to a very high voltage potential at a very high frequency, which causes ionization of air. The equipment used to achieve this comprises a generator, which converts available 230V / 415V, 50Hz power supply a high voltage transformer and the treating station itself. Now under the influence of the electric field, ionized air molecules are made to move about. As the electric field increases, so does the speed and hence the kinetic energy of ionized air molecules. The random collision of these ions with other charged ions result in increased number of ions. Thus when sufficient electric field is developed, then the air gap can be said to have broken down into an ionized current carrying conductor. During this process the atmospheric oxygen is broken down into nascent oxygen and Ozone. The ozone is extracted out of the system where as the active nascent oxygen immediately oxidizes the film.APPLICATIONS: Blown films (Mono,Multi,A-B-A and PP) Extrusion Laminations (PP,BOPP,fabric,Non-woven fabric) Laminations (solvent & solvent less) Printing (High speed Roto and Flexo)Converting (Slitting and sheet cutting) Label printing (Bopp, paper, & Metalized Polyester) Blow moulding 3D objectsAutomotive Industries TECHNICAL SPECIFICATION:Max Power: 3.0Kw, 3.5Kw, 4.0Kw.HT voltage: 12Kvolts (Frequency 20-40 KHz)Transformer: Di electric oil filled Solid transformerAssembly types: Swinging type Aluminium electrode for Extruder ApplicationSwinging type ceramic electrode for Lamination printing applicationIt can treat web width up to 2250mm (90 inch) for line speeds up to 220MTS/MIN for both side of extrusion2. TECHNICAL SPECIFICATION:Input voltage: 230V /50-60Hz AC Single PhaseMax Power: 0.5Kw, 1.0Kw, 1.5Kw, 2.0KwHT voltage: 6Kvolts (Frequency 20-35 KHz)Transformer: Epoxy filled Solid transformerAssembly types: Simple Pneumatic Open /Close for Extruder ApplicationFlame gun for 3D Object application.It can treat web width up to 1250mm (50 inch) for line speeds up to 80MTS/MIN for both side of extrusionFEATURES:Latest IGBT Technology and PWM auto tuning techniques for efficient output.Efficient Modulation and Frequency Circuits.16X2 Jumbo character LCD, white display with blue backlight for better view. Buzzer Alarm for when fault occursFault Indication.Auto tuning FrequencyIGBT mounted driver board for robust operation at all conditionsMembrane keypad for on /off controlDischarge station open /close system from panel end.