Antistatic Epoxy Flooring For Hospital And Factory Use Industrial Epoxy Flooring

Antistatic Epoxy Flooring for Hospital and Factory Use Industrial Epoxy Flooring
Epoxy floor paint is a kind of high-strength, wear-resistant and beautiful floor. It has the advantages of no seam, solid texture, good chemical resistance, anti-corrosion, dustproof, convenient maintenance and low maintenance cost.
Epoxy floor can be designed according to different application requirements: such as thin layer coating, 1-5mm thick self-leveling floor, non-slip wear-resistant coating, mortar coating, anti-static, anti-corrosion coating. Epoxy floor can be roughly divided into: epoxy grindstone floor, epoxy resin sand sand floor, epoxy self-leveling floor, epoxy mortar type floor, epoxy plain coating floor.
classification
a. Epoxy plain coating floor (the place where the general workshop is dust-proof and the environment is not high).
b. Epoxy self-leveling floor (clean room, high purification industrial production area).
c. Epoxy anti-static floor (manufacturing workshop for electronics industry that is required to resist static electricity).
d. Epoxy mortar wear-resistant floor (the factory has heavy-duty running workshops, warehouses, passages, underground parking lots, etc.).
How to choose epoxy floor paint?
In order to help customers who use floor decoration protective coatings to correctly select the type of floor and effectively control the construction cost, it is recommended that customers start with the following factors:
Mechanical performance requirements
The main three aspects are as follows:
1. Abrasion resistance: Which vehicles will travel when the floor is in use;
2. Pressure resistance: how much load the floor will bear when it is used;
3. Impact resistance: Whether the impact force will cause the floor surface to peel off;
Chemical performance requirements
The main considerations are as follows:
1. Acid and alkali resistance: The type and concentration of corrosive chemicals used.
2. Solvent resistance: solvent type and contact time when used.
Floor location status
According to the location of the floor on the underground floor or the ground floor, do you need to prevent moisture or choose a special moisture-proof floor.
Base condition
1. Base strength: general requirements compressive strength a Y 20Mpa
2. Flatness: Do you need to repair with epoxy mortar.
3. Self-leveling is generally required before ground construction.
Aesthetic requirements
1. Color requirements: Do you need a color division area?
2. Brightness requirements: Is it a matt or glossy type?
3. Flatness requirements: Is there a requirement for the flatness of the floor?
Safety requirements
If the floor is in a greasy environment or on a ramp, you need to choose a non-slip floor; if you are in a special place such as a gas station or oil depot, you need to choose anti-static and explosion-proof.
Construction process
1. Base surface treatment;
2, apply the primer;
3, apply putty;
4. Grinding and vacuuming;
5, apply the paint;
The primer is made of epoxy resin primer main agent: curing agent, and the curing is evenly cured for about 10 minutes. It is sprayed once with a wool roller. The primer is mainly used to close the base layer and seal the water and dust.
6. Filling and processing
Make Epoxy mortar with epoxy varnish & quartz sand to fill expansion joints and cracks.
7. Apply the epoxy Middle coat.
8. Apply the epoxy finish coat.
9 Engineering maintenance
Technical indicators
Drying time surface dry a 4
Hard work a 24
Adhesion (level) a 1
Pencil hardness a Y2H
Impact resistance 50 passed
Flexibility 1mm through
Wear resistance (750g/500R, weight loss g) a 0.03
Water resistance No change for 48 hours
Resistance to 30% sulfuric acid for 7 days without change
40% sodium hydroxide resistant, no change for 7 days
Gasoline resistant 120# 7 days no change
Resistant to lubricating oil for 7 days without change
Nine: performance requirements
1.Cleanliness requirements: For places with high cleanliness requirements, self-leveling floors should be used.