Slim Drill Sld-100 (Ld-4)

Slim Drill SLD-100 (LD-4) TECHNICAL SPECIFICATION Mode of Drilling Down the Hole Air Hammer Hole Diameter 90 mm- 115mm (3 -4 ) Max. Drilling Depth (Vertical) 30 Mtrs.(100 ft) Max. Drilling Depth (Horizontal) 20 Mtrs. (65 ft) Drill Pipe Diameter 60mm / 76mm (2/ 3) Drill Pipe Length 1.22 mtrs (4ft) Rotary Head 4 Cylinder Piston type Air Motor with spur type Reduction G earbox BHP 4.5 RPM 0-50 Max. Torque 1125 Nm (10,000 1bf.in) Feed Unit 4 Cyliner Piston type Air Motor with spur cum worm drive Gear box BHP 4.5 Type of Feed Chain feed Pull Down Force 0- 2200 kgf Pull Up Force 0- 2200 kgf Pull Up & Pull Down Speed 0- 15 mtrs/min Air Line Lubricator Provided   General Dimensions & Weight Height of RIG 3000 mm Depth of RIG 600m Width of RIG 600 mm Weight 468 Kgs Air Compressor (Recommended) Minimum Maximum Free Air Delivery 10.3 m3/min (365 cfm) 12.7 m3/min (450 cfm) Working Pressure 7.03 kg/cm2 (100psi) 10.5 kg/cm2 (150 psi) Slim Drill SLD-100 (LD-4) : Pneumatically operated Drill capable of Drilling in both DOWN THE HOLE & JACK HAMMER modes-ideally suitable for drilling lead holes for DIAMOND WIRE CUTTING of decorative MARBLE, GRANITE ROCKS etc. Machine has been specially designed for Precision drilling of matching holes and ability to drill holes in both VERTICAL & HORIZONTAL positions. A ball joint is provided at the bottom of the Mast to facilitate Precision alignment for matching holes. Provided with one spike & two Anchoring Rods & Adjusting screws to maintain perfect rigidity during drilling. Light in weight, machine can be easily dismantled into four SUB-ASSEMBLIES- each weighing not more than 50 kgs- thus ensuring easy portability and repositioning Special Features Stable Drilling capabilities.Structural designed for extra rigidity.Anchoring arrangement ensures perfect stability during drilling.Rotation and winch units modified to provide additional power for faster drilling and rapid withdrawals, longer tool life etc.Rigid Output Shaft (Rotation Unit) with extra bearing support and thicker thread profile.Specially designed fluid seals for Output Shaft Rotation unit to prevent air leakages.