Expanding PU Foam

Expanding PU Foam

Properties
PU Foam G is a gun grade, quick setting expanding foam with good heat and sound insulation. It adheres to most building materials like wood, concrete, brick, metal, aluminum.
Advantages of Gun Grade

• Exact dosage - economical consumption
• Easier to handle and work with the PU-foam
• No leaking or dripping from the nozzle
• Less cleaning
• Quick can replacement
  

Use
It is used in building industry for sealing, filling, insulating, fixing, installing and mounting (windows and door frames).
Application

Surfaces should be clean, free of dust, grease and other impurities. Dry and porous surfaces should be moistened with water. The optimal temperature of can at work is 20- 25°C. At lower temperatures put the can into warm water (max. T=40°C) for about 20 minutes. Before use shake can thoroughly with the valve upside down and screw it onto the gun.

Press the trigger and let the foam flow through (ca. 2 seconds). This fills the foam into the extension tube. During foam application hold the with the can in vertical position. The output of the foam can be regulated with the trigger and controlled with the adjustment screw on the back side of the gun.

When replacing the can, shake the new can vigorously, unscrew the empty can and immediately replace it with new foam can. The can replacement has to be fast to prevent the PU- foam hardening in the adapter. Hardened PU residues in front of the nozzle can be removed only mechanically. At short work interruptions (less than 48 hours) the can can be left screwed onto the gun, but the screw on the back side of the gun must be tightened. The can must be under pressure; otherwise the foam will harden in the gun. At longer work interruptions, clean the gun with the PU Foam cleaner. It should be considered that the foam would expand 30 - 50%. If you are filling a gap wider than 5 cm, work in layers. Apply the second layer once the first one has hardened. You can speed up the process of hardening by spraying the foam with water. Once the foam has hardened, cut it with a sharp knife and finish with plastering, covering, painting,If you do not use the entire can, clean the valve with the PU Foam cleaner or acetone. Cured foam must be protected against UV.

Established in 2008 , TRI POLARCON PVT. LTD. has made a name for itself in the list of top service providers of Waterproofing Services in India. TRI POLARCON PVT. LTD. is listed in Trade India's list of verified companies offering wide array of Floor Hardeners, Expanding PU Foam, Grouts and Anchors etc. Contact here for Waterproofing Services in Pune, Maharashtra.

• BUSINESS TYPE Manufacturer, Service Provider, Supplier
• EMPLOYEE COUNT 50
• ESTABLISHMENT 2008
• ANNUAL TURNOVER Rs 1 Crores
• WORKING DAYS Monday To Sunday