Xrw-300 Hdt/vicat Tester

Usage :
This tester is mainly used to do the HDT test and VICAT test for non-metal materials: such as plastic, rubber, and nylon.

Introduction :
Vicat softening point is the temperature at which a standard indenter penetrates 1mm into the surface of a plastic test specimen under a constant load when the temperature is raised at a uniform rate.

HDT is the temperature when a standard test specimen is subjected to a bending stress to produce one of the nominal surface stresses given in the relevant part of the international Standard. The temperature is raised at a uniform rate, and the temperature at which a specified deflection occurs is measured.

The attained heat resistance rate of plastic materials is a widely required parameter for product characterization, for quality control, as well as for evaluating their conformity to the previewed applications.

Standards Complied:
ISO75, ISO306, ISO 2507, ASTM D648, ASTM D 1525, GB/T 1633, GB/T 1634 and the equivalent

Main technological parameter:
Operating temperature : Ambient temperature to 300
Heating rate : (120A 10)/h or (50A 5)/h
The Max Temperature Error : A 0.5
Distortion Range : -0.1mm1.1mm
The Max. Distortion Error : 0.01mm
Test Stations : 2,3,4,6 (selectable)
Heating Medium : methyl silicon oil