EN54-12 Compliance
Hassle free alignment, built with digital guide display and laser beam pointing
Employ single-ended design through reflective mirror
Four ranges wide monitoring from 8-100 meters via encoder
Three users programing sensitivity adjustment
Built-in microprocessor
Self-diagnosis function can monitor for internal faults
Automatic compensation for factors weakening received signals, such as dust contamination, positional movement and ageing of the transmitter
Fire and Fault interfacing relays
Attractive and pleasing appearance

echnical Specification

Part Number	TX7130
Standard
Listed	LPCB Approval
Compliance	EN54-12
Fire Detection and Alarm Systems	BS 5839 Part 1
2002
Specification
Operating Voltage	20 V to 28 V DC
Current Parameters
Standby	23mA
Commission	56mA
Alarm	33mA
Beam Sensor Sensitivity [via Encoder]
Level 1	2.6 dB High Sensitivity
Level 2	3.8 dB Medium Sensitivity
Level 3	5.8 dB Low Sensitivity \342\227\217
Beam Pathway Length [via Encoder]
Span 1	8 to 20 meters Limited Path
Span 2	20 to 40 meters Short Path
Span 3	40 to 70 meters Normal Path
Span 4	70 to 100 meters Long Path
Beam Path Angle	\302\2610.4\302\272 Directional
Alignment Guide	Laser Beam Pointer
Digital Display Guide	Nixie Tube
LED Indicator Guide
Red	Fire
Yellow	Fault
Green	Alignment
Reset Time	Less than 2 Second
Relay Capacity [Fire & Fault]	Normally Open & Close/ 2.0 A; 30 VDC
Physical
Material / Colour	ABS / White
Dimension / Weight	L
190.87 x W	126.87 x H
91.96 mm / 440 gm
Weight	0.130 Kg with base
Environmental
Operating Temperature	-10\302\260C to +50\302\260C
Ingress Protection Rating	IP30 [IP66 glue seal-For permanent fixing]
Humidity	0 to 95% Relative Humidity, Non condensing

Beam Detector in Canada

TX7130 Conventional Beam Detector - ABS, 190.87x126.87x91.96 mm, White | EN54-12 Compliant, Easy Alignment, Wide Range 8-100m, Self-Diagnosis

Post Buy Requirement