Metal Melting Furnaces In Pune

SizeCustomized

Product TypeMelting Furnace

ConditionNew

MOQ10 Unit/Units

SizeDifferent Sizes Available

UsageIndustrial

ConditionNew

MOQ1 Piece/Pieces

Product TypeAluminium Melting Furnace

UsageIndustrial

SizeStandard

Product DescriptionElectric Resistance Melting Furnace Melting of non-ferrous metal/alloy up to around 1250C temperature of molten metal. Three phase electrical power fed to electrical resistance heaters placed around periphery of Si-Cr crucible melts the metal in crucible. SPECIAL FEATURES : 85% efficiency, low c

Product Type100-1000 Kg Laboratory Muffle Furnaces

ConditionNew

Type100-1000 Kg Laboratory Muffle Furnaces

Product DescriptionWe offer muffle furnace whose casing is made of thick MS sheet. Swing /sliding door with peep hole is provided. Casing is duly painted. Grooved Refractories / tiles support the Heating Elements / Rods placed in between the MS Sheet Casing and the Heating Chamber. Hot and Cold faced bricks are provid

MOQ1 Unit/Units

Width60 Centimeter (cm)

UsageIndustrial

Height10 Centimeter (cm)

MOQ1 Unit/Units

UsageIndustrial

FeatureMelting Cum Holding Furnace for Aluminium

ColorSky Blue

MOQ2 Unit/Units

Product TypeMelting Furnace

UsageIndustrial

ColorGrey

Product DescriptionWe have designed the Bell Furnace to suit customers crane height limitation. The furnace shown in this picture was designed for aluminum conductor annealing. We are capable of designing the Bell Furnaces for other applications to match your design specifications and constraints

Product DescriptionWe are offering construction and installation facilities for gas fired roller hearth furnace, provided with switch gear items of reputed make, safety interlocks & protection devices for safe furnace operations. The heating elements operating on low surface load, facilitates longer element life and c

Product DescriptionPicture shows a 3-ton capacity furnace with 6 numbers of MS pots for bright annealing of copper under Vacuum. This is exported to Jeddah. Similar furnaces are supplied in domestic market as well. For commercial heat-treaters, provision is made to anneal aluminium in the same furnace with baskets and

Product DescriptionRoller Hearth Furnace is been used for transformer lamination, annealing, by using low thermal mass. Our designed Roller Hearth Furnaces reduced the connected load and power consumption by about 30%. In the picture only bottom half of the furnace is been shown and it has been used for Transformer La

Product DescriptionWe offer rectangular /circular bell furnace. It can operate at 1000 degree Celsius. Fast and efficient in nature, the walls of this furnace are generally of ceramic fiber modules or ceramic fiber blankets. These are low thermal mass highly efficient furnaces with less connected loads. It is widely u

MOQ1 Piece/Pieces

SizeMaterial Loading Capacity 1000 Kg

Usagecommercial

FeatureControl Control Type Fully Automatic PID control