Softwood Plywood - Spf Material, 1.2x2.4 Metres Or 4x8 Feet Dimensions, 1.4-4.3 Mm Thickness, Tongue And Groove Design For Enhanced Stability

Highly regarded as one of the trustworthy names engaged in manufacturing and supplying a considerable assortment of Softwood Plywood in Bengaluru, Karnataka, India. Softwood panel is usually made either of cedar, Douglas fir or spruce, pine, and fir (collectively known as spruce-pine-fir or SPF) or redwood and is typically used for construction and industrial purposes. The most common dimension is 1.2 by 2.4 metres (3 ft 11 in A 7 ft 10 in) or the slightly larger imperial dimension of 4 feet A 8 feet. Plies vary in thickness from 1.4 mm to 4.3 mm. The number of plies depends on the thickness and grade of the sheet but at least three are required as the minimum odd number of plies. Roofing can use the thinner 5/8" (15 mm) plywood. Subfloors are at least 3/4" (18 mm) thick, the thickness depending on the distance between floor joists. Plywood for flooring applications is often tongue and groove; This prevents one board from moving up or down relative to its neighbor, so providing a solid feeling floor when the joints do not lie over joists. T&G plywood is usually found in the 1/2" to 1" (12a 25 mm) range.