Ro Water Plant By Nirvanas Industries Limited

Plant Introduction:Your requirement of Pure Water, We have designed the proposed plant to achieve the final treated water quality. The RO plant has been designed of 1,000 LPH.   Raw Water Characteristics: Assumed Treated Water Quality : <100 PPM The proposed Water Treatment System based on following Water Analysis,     Sr. No. Parameter Analysis Value. 1 Total Dissolved Solids 1500 PPM 2 Turbidity <1 NTU 3 Total Hardness < 250 4 PH 7.5 5 Organics And Bacteria NIL 6 Oil And Grease NIL 7 Residual Chlorine NIL 8 Temperature ( C ) < 40. 9 Color Color Less 10 Odor Odor Less 11 BOD & COD NIL  Treated Water Quality From R.O. Plant:  The above quality shall be achieved subject to:   1] Feed quality is same as specified in your enquiry. In case of any change in The quality of raw water, the same may have implications on the Operating Parameters and End-water quality of the system. 2] Feed limiting condition mentioned in our offer is strictly maintained. 3] Operation of Water treatment plant is strictly followed in totality as per Our operating manual and instructions.     4] Pure chemicals, Original Spares and consumables, recommended by us, Are used in W.T.P. CAPACITY: 1000 LITERS PER HOUR PLANT             1.3 Operating conditions: Feed water Flow Rate 1800 LPH Product water Flow Rate 1000 LPH Average recovery @ 60 % Approx Operating Pressure 11 Kg/cm System 1  : Mineral Water Plant 1       Raw Water Pump 2       Pressure Sand Filter 3       Activated Carbon Filter 4       Antiscalant Dosing System 5       Micron Cartridge Filter 6       High Pressure Pump 7       Reverse Osmosis System 8       Product Water Storage Tank 9       Product Water Transfer Pump 10      U.V. Disinfection System 11      Post Micron Cartridge Filter (Stage-1) 12      Post Micron Cartridge Filter (Stage-2) 13      Post Micron Cartridge Filter (Stage-3) 14      Ozone Generator Tank 15      Ozone Circulating Pump 16      Ozone Generator System