R.o.water Chiller Unit

R.O.water chiller unit manufacture

Reverse Osmosis System
Membrane Type
Membrane Configuration
Chilling Unit
Cooling Capacity
Temperature Range
Refrigerant Type
Filtration Stages
Pre-filtration

The specifications of an R.O. (Reverse Osmosis) Water Chiller Unit can vary based on the specific model and manufacturer. However, here are some common specifications and features that you might find in such units:

Reverse Osmosis System:

Membrane Type: Thin Film Composite (TFC) or similar high-rejection membranes.
Membrane Configuration: Typically, these systems use a spiral-wound membrane configuration.
Chilling Unit:

Cooling Capacity: Expressed in terms of the amount of water the unit can chill per hour, usually measured in gallons or liters.
Temperature Range: Specifies the range of temperatures the chilling unit can achieve.
Refrigerant Type: Common refrigerants include R134a or R404a.
Filtration Stages:

Pre-filtration: Sediment filters, activated carbon filters, and other pre-filters to remove particulate matter and chlorine.
Reverse Osmosis Stage: Typically includes a high-quality RO membrane for removing dissolved impurities.
Post-filtration: Additional filters to enhance water quality after the RO stage.
Storage Tank:

Tank Capacity: Specifies the storage capacity of the tank, often measured in gallons or liters.
Control Panel:

User Interface: Digital display or control panel for setting and monitoring parameters.
Control Features: Temperature control, system status indicators, and possibly programmable settings.
Pump:

Type: Booster pump for efficient water flow through the membrane.
Automatic Shut-off:

Energy-Saving Features: Automatic shut-off or standby mode to conserve energy when the unit is not in use.
UV Sterilization (Optional):

UV Lamp Power: If equipped with UV sterilization, the power of the UV lamp is specified.
Materials and Construction:

Material: Corrosion-resistant materials for durability.
Frame: Stainless steel or powder-coated steel frame.
Dimensions and Weight:

Unit Dimensions: Height, width, and depth of the entire unit.
Weight: Total weight of the unit.
Electrical Specifications:

Voltage: Input voltage required (e.g., 110V, 220V).
Power Consumption: Power consumption in watts.
Certifications:

Compliance: Certifications indicating compliance with industry standards and regulations.
Application Areas:

Intended Use: Specify whether the unit is designed for residential, commercial, or industrial applications.
Maintenance Requirements:

Filter Replacement: