Dual Conveyor Horizontal Resaw Bandsaw Machine - Steel, 1750x2200x1450 Mm, Black | Manual Control System, Semi-automatic Cutting Function, 300 Ton/day Capacity, 40/60/80 M/m Cutting Speed

Word perfect format
Safety operation rules of saw machine
Safety operation rules of saw machine
1. Operators and maintainers of band sawing machine must receive professional training and master the operation and maintenance skills of band sawing machine. Operators shall ensure their concentration. Before operation, they shall wear tight protective clothing, fasten the cuffs, keep the jacket and hem closed. They are not allowed to wear gloves, wear, take off or change clothes beside the running machine tool, or wrap the cloth on the body to prevent the machine from wringing. Safety helmet must be worn, braids should be put into the hat, and skirts and slippers are not allowed. A kind of
2. Make all preparations before starting the machine. Install the vise so that the sawing center is in the middle of the sawing stroke. The raw materials are placed horizontally on the vise and at right angles to the saw blade; if it is necessary to saw the bevel angle, first adjust the vise to the required angle, and the saw size shall not be greater than the maximum saw size of the machine tool. A kind of
3. The saw blade must be tight and the speed and feed weight must be consistent. Before sawing, test run idle for 3-5 minutes to blow out the air in the hydraulic cylinder and each oil groove on the hydraulic transmission device, and check whether the sawing machine has faults and the lubricating oil circuit is normal. Chinese style
4. The adjustment of the chip removal wire brush shall make the wire contact the bottom of the band saw blade, but not exceed the root of the tooth. Observe whether the wire brush can remove the dust. A kind of
5. Adjust the guide arm along the dovetail guide rail according to the size of the processed workpiece. The guide must be locked after adjustment. A kind of
6. When sawing pipes or thin plate sections, the tooth pitch shall not be less than the thickness of the material. When sawing, the handle should be back to the slow position and the feed amount should be reduced.