Bus Bar Heat Shrinkable Sleeves

Bus Bar Heat Shrinkable Sleeves Being a customer focused company we are vigorously dedicated towards creating exporting and providing the superlative in class Bus Bar Heat Shrinkable Sleeves. It is extensively utilized to safeguard complex busbar connections where tube devices cannot be functional; this Heat Shrink Busbar Sleeve is offered in various specifications as per the exacting alternatives of the end users. The Bus Bar Insulation Sleeve offered is created with the usage of cross linked polyolefin and modern state of art technology. It is audited against number of parameters we also offer this Bus Bar Heat Shrinkable Sleeves Bus Bar Insulator to our end users at competitive market prices. Features of  Bus Bar Heat Shrinkable Sleeves:Material: PEOperating Temperature: -55C~125C;Shrink Ratio: 2:1;Shrinking temperature: Start at 70C and shrunk totally at 110C(CB) or 115CSize range: 0.8 ~ 180mm (3/64 ~ 5inch or lager) special size are negotiable.Standard: UL224 VW-1 C-UL CSA C 22.2 OFTAvailable Color: Black Red Yellow Green Blue White Purple and Grey etc or upon customer's special requirement.Meets: GB/T 1059-2007Shrink ratio:2:1 2.5:1 3:1Tracking resistant low smoke radiating high quality adaptable fire resistant Min. shrink Temperature:84CMin. full recovery temperature:120CContinuous operating temperature:-55C~125CRoHS compliantStandard colors: Red yellow green and other colors available on your requestStandard Colors Available:BlackRedYellowBlueTolerances:Width : +/-  2mmThickness : +/- 0.03mmShrink Ratio:Machine Direction : +/-10% to +/-20%Transverse Direction : 35% to 40%  (+/-5%)Usage of Bus Bar Heat Shrinkable Sleeves:Beneficial in dielectric and mechanical assurance joints and terminals.Application range: Electrical industry.Characteristics of  Bus Bar Heat Shrinkable Sleeves :Shrink ratio: 2:1 (35kV) 2.5:1 (10kV)Shrink temperature: 84C~125COperating temperature: -55C~125CEnvironmental Flexible flame retardantStandard:GB/T 1059-2007               Environment certificate: ROHSQuick Detail:-55 to 135RSFR-135G(3X)High shrink ratioRoHS CompliantFlexibleFlame RetardantShrink temperature: 120 Technical Data: Property Test Method Standard Value Operation Temperature IEC 216 -45 to 105 Tensile Strength ASTM-D-2671 10MPa Elongation at Break ASTM-D-2671 400% Tensile Strength after Aging ASTM-D-2671 8MPa (130168 hrs) Elongation at Break after Aging ASTM-D-2671 320% (130168 hrs) Dielectric Strength IEC 60243 25kV/mm Volume Resistivity IEC 60093 11014cm Dielectric Constant IEC 250 3.0 Longitudinal Shrinkage ASTM-D-2671 10% Eccentricity ASTM-D-2671 30% Water Absorption ISO 62 0.5% Flammability (Oxygen Index) IEC 4589 28 Copper Corrosion ASTM-D-2671 No corrosion (130168 hrs) Cold Bend ASTM-D-2671 No cracking (-40 4 hrs) Selection Table (10 kV Heat Shrink Busbar Sleeve): Product No. As Supplied(mm) After Recovered(mm) Standard Length Suitable for Rectangular Busbar Suitable for Circular Busbar ID (Min) Wall Thickness ID (Max) Wall Thickness (10%) (mm) (mm) (mm) 20 20 1.2 8 2.5 1000 20 15 25 25 1.2 11 2.5 1000 25 15 30 30 1.2 13 2.5 1000 30 20 40 40 1.2 16 2.5 1000 40 25 50 50 1.3 18 2.7 1000 50 30 65 65 1.3 28 2.7 1000 65 40 75 75 1.3 31 2.7 1000 75 50 85 85 1.3 36 2.7 1000 85 55 100 100 1.3 42 2.7 1000 100 75 120 120 1.3 48 2.7 1000 120 85 150 150 1.3 62 2.7 1000 150 105 180 180 1.3 73 2.7 1000 180 120 210 210 1.3 84 2.7 1000 210 130 230 230 1.2 85 2.7 1000 230 135 250 250 1.5 102 3.7 1000 250 140 300 300 1.6 110 3.9 1000 300 160 350 350 1.2 142 3 1000 350 200 400 400 1.2 160 3 1000 400 260 450 450 1.4 193 3.2 1000 450 300 500 500 1.2 193 3.2 1000 500 330 Selection Table (20 kV Heat Shrink Busbar Sleeve): Product No. As Supplied(mm) After Recovered(mm) Standard Length Suitable for Rectangular Busbar Suitable for Circular Busbar ID (Min) Wall Thickness ID (Max) Wall Thickness (10%) (mm) (mm) (mm) 30 30 1.6 12 3.7 1000 30 20 40 40 1.6 16 3.7 1000 40 25 50 50 1.6 20 3.7 1000 50 30 60 60 1.6 25 3.7 1000 60 40 70 70 1.6 30 3.7 1000 70 45 85 85 1.5 32 3.7 1000 85 55 100 100 1.5 40 3.7 1000 100 65 120 120 1.5 50 3.7 1000 120 80 140 140 1.5 56 3.7 1000 140 100 160 120 1.5 64 3.7 1000 160 110 180 180 1.5 72 3.7 1000 180 130 200 200 1.5 82 3.7 1000 200 140 220 220 1.5 88 3.7 1000 220 150 Selection Table (35 kV Heat Shrink Busbar Sleeve): Product No. As Supplied(mm) After Recovered(mm) Standard Length Suitable for Rectangular Busbar Suitable for Circular Busbar ID (Min) Wall Thickness ID (Max) Wall Thickness (10%) (mm) (mm) (mm) 25 25 2 10 4.7 1000 25 15 30 30 2 15 4.7 1000 30 20 40 40 2 17 4.7 1000 40 25 50 50 2 20 4.9 1000 50 25 65 65 2 27 5.2 1000 65 30 75 75 2 30 5.2 1000 75 35 85 85 2 32 5.2 1000 85 40 100 100 2 39 5.2 1000 100 75 120 120 2 50 5.2 1000 120 85 150 150 2 60 5.2 1000 150 105 180 180 2.2 70 5.5 1000 180 120 210 210 2.1 82 5.3 1000 210 130 Other Details Heat Shrink Busbar Sleeve:It is utilized to provide insulation safe guard for busbar in switchgear and substation this Heat Shrink Busbar Sleeve is valued among our end users who are located from corner to corner of the country. At our location this busbar sleeve is fabricated with extreme concern by utilizing quality analysis cross connected polyolefin and the most modern technology. Keeping in mind the variegated needs of the end users we offer this  Bus Bar Heat Shrinkable Sleeves in varied patterns and arrangements. Our prominent end users can gain this Heat Shrink Busbar Sleeve from us at rational prices within the pre determined and preset time period.Features:It is fabricated using cross linking polyolefinHigh resistance to tracking aging and corrosionIt is utilized to provide insulation safety for busbar in switch-gear and substationIt can be offered in constant lengthThe constant operation temperature ranges from -45 to 105The contract temperature will initiate at 110 and completely improved at 130They are available in following Colors like yellow red green blue blackSize range: 0.8 ~ 180mm (3/64 ~ 5inch or lager) special size are negotiable.Shrink Ratio: 2:1Operating Temperature: -55C~125C