Aluminium Lidding Foil

P { margin-bottom: 0.21cm; } We are one of the prominent manufacturers, suppliers and exporters of finest quality Aluminium Lidding Foil. These foils are manufactured using superior quality raw material sourced from authentic vendors of the market. Owing to their fine finish, high strength and moisture resistance, these foils are highly appreciated by our customers. Moreover, these foils are leak and tamper proof. Aluminium Lidding Foil is extensively used for packing dairy and pharmaceutical products. Foil Material Soft, fully annealed Aluminium alloy AA-1200 or AA-8011 confirming to Aluminium Association specification. The foil can have either side surfaces bright or one side bright and the other side matt as desired by the customer. Standard Foil Gauge Options Tolerance (+/- 8%) 0.030 mm +/- 0.00240 mm 0.038 mm +/- 0.00304 mm 0.040 mm +/- 0.00320 mm Sealant & Coating2.1Different tub materials ask for different sealant film or lacquer for compatibility. One side of the foil is either coated with a heat seal lacquer or laminated to some polymer films. The type of sealant are: Tub Material Sealant Layer Coating (GSM / Film thickness PP Lqcquer 7-9 +/- 1 PS Lqcquer 6-8 +/- 1 PVC Lqcquer 6-8 +/- 1 PET Lqcquer 6-8 +/- 1 PE Film 125-150 +/- 15% Gauge HDPE Film 125-150 +/- 15% Gauge We also have a common lacquer for PS, PVC and PET (As the lacquers are adjusted as per the substrate, it is important to mention substrate with each enquiry).  Other side, the top side of the lid. foil, is coated with a clear protective lacquer which is treated for printing or printed as per customers' design. (Presently up to three colours). ConfigurationThese foils are available in slit reel form. CoreMaterial otpions: (a) Alluminium (b) Card Board. Core I.D.:Alluminium: 76mm +/-  mm ormm +/-  mmCard Board: 76mm +/- 0.5 mm. Reel Size & ODReels are delivered with 100 mm to 750 mm &OD of 400 +/- 10 mm maximum or as specified by the customer JointsButt type with 25 mm cellotape, Average number of joints are less than two. Reel Wander: Within +/-1 mm. IdentificationEach reel is identified with a ticket having reel number, specification, operator number and manufacturing date. PackingPacked in cardboard carton.For export, the reels are packed in wooden crate/box.. Relevant markings are provided in each outer package. Test CertificationsTest certificates giving the actual observed values of different parameters would accompany the supplies.Technical Specifications  Density Of LDPE 0.917 g/cc Peel Strength OfLamination: 200 g/15 mm min. Seal Strength Bet. Top & Bottom Foil: 450 g/15 mm min. Printing And LacquerCoating: Printed as per text, layout and approved by the Customer. For non-printed specification, clear Lacquer to be coated as a protective coating and good printability. Printing inks and lacquer coatings are capable to withstand 180 deg. C for 1 sec. dwell time. Configuration: Printed and Unprinted Pharma Foils are available in the reel forms. Unprinted pharma foils are also available as Jumbo roll. Winding Direction: Generally, printed or clear lacquer side is out in the finished reel. Core: Material options (a) Plastic (b) Aluminium (c) Card BoardCORE ID: 76 mm +/- 0.5 mm. The length of the core is equal to the width of the web. Splices: Butt type made with 25 mm pressure sensitive tape. Reel Outer Diameter: 250 +/- 10 mm for slit material. 400 +/- 10 for Jumbos. Reel Wander: Within +/- 1 mm Reel/Web Width: Plain : 45 mm to 800 mm with a tolerance of +/- 0.5 mm.Printed: 45 mm to 600 mm with a tolerance of +/- 0.5 mm. Joints Per Reel: Maximum 2. Average less than 1. Pin Holes: Nil.