Split Flow No Purge Loss Air Dryer By Atmos Power Pvt Ltd

We are offering our customers a wide range of Split Flow No Purge Loss Air Dryer. The wet Air / Gas stream is split at the air dryer inlet through a differential distributor valve. Part of this air / gas stream is passed through an external heater and heated to a regeneration temperature of 160-180A C, then it is fed to the Adsorber desiccant tower A containing Silica gel or activated Alumina / Molecular Sieves under regeneration thus removing out the moisture from the desiccant bed. A water cooled / air cooled aftercooler condenses the desorbed moisture which is discharged regularly through the automatic drain trap after condensation This Air/ Gas stream joins the main incoming air stream and goes for drying to the other tower B under drying. Normally a Cycle time of 8+8 hrs is utilized to complete one cycle of operation. After each operation the changeover is effected automatically. This type of dryer provides an outlet Dew Point of -40 deg C. The Air dryer can be supplied with standard accessarie like simplex / duplex Prefilters / Afterfilters, Flowmeters, dew point meters etc. The system is fully automatic / semi automatic , with Timer / PLC controls with feedbeck to/ from main DCS.