Water Based Epoxy Self Level Flooring

Water Based Epoxy Self Level Flooringis a two component water based Epoxy Self Level Flooring System. It forms a tough, hard, joint-less mirror like finish. It gives a seamless, dustproof and easy to clean hygienic surface which is resistant to many mild chemicals, oils and water.

APPLICATION PROCEDURE:
While applying SMACAR EPOTOP SLF layer, surface preparation is the most important part. Remove all the loose materials to expose the base surface. Wash the surface with plenty of water. A 10% muriatic acid solution wash should follow. Again wash the surface with plenty of water. Fill all the cracks, honey-combs, voids etc using cement mortar or our BONDCRETE RP fast repair compound. Let the surface dry completely. Apply a coat of SMACAR EPOPRIME liberally by brush over the surface. Allow the surface to be touch-dry.
Mix the resin & hardener parts of SMACAR EPOTOP SLF thoroughly, to get a uniform consistency. Remove any lumps. Apply the SMACAR EPOTOP SLF layer over this primer coat by a notched trowel and spiked roller.