Frp Easy Mould (De Shuttering Oil Water Based)

We manufacture and supply Easy Mould (De Shuttering Oil Water Based) in Ahmedabad, Gujarat, India.

Conventional mould releasing oil-which are some times burnt used oil does not give smooth surface but it darkens the concrete surface .Easy mould is a specially formulated Liquid that could be dilute with water. The Liquid chemical reacts with alkali contained in cement that forms a water repellant film not allowing the concrete to stick to the form work giving a smooth exposed concrete without any honey combing or pinholes

Easy Mould is used on all type of form works steel, wood, plastic, fiberglass etc in casting RCC as well as mfg. Precast / Pre-stressed concrete.

Advantages:

1.Form work does not stick to the concrete surface and hence it is easier to remove.
2.Forms could be cleaned easily without damaging the same; hence their life is increased.
3.The concrete surface when is required to be kept exposed, does not require subsequent touchup with cement as there are no blowholes or honey combing.
4.It does not stain the surface as is the case in cheaper burnt oil available in the market.
5.Long shelf life and does not deteriorate.
6.It is very safe in handling as it is non hazardous / non inflammable.