0-a 10v/4-20ma To Ethernet Converter

Under the stern direction of our capable personnel, we are manufacturing, exporting, distributing and supplying an innovative compilation of 0-A 10V/4-20mA to Ethernet Converter in Shenzhen, Guangdong, China.

Two/Four-channel 0-75mV/0-5V/0-A 10V/4-20mA/0-A 20mA to RS232/RS485 Converter with LED Display
Model selectioni
SYAD 02/04B - U(A)
02/04B : Channel choose
02B:Two channel
04B:Four Channel
U(A): input voltage or current signal
U1i 0-5V A1i 0-1mA
U2i 0-10V A2i 0-10mA
U3i 0-75mV A3i 0-20mA
U4i 0-2.5V A4i 4-20mA
U5i 0-A 5V A5i 0-A 1mA
U6i 0-A 10V A6i 0-A 10mA
U7i 0-A 100mV A7i 0-A 20mA
U8i Customized A8i Customized

Notei SYAD02/4B module supports both RS232 and RS485 communication interface, the user can select the corresponding communication interface based on the use of the environment, but at the same time can have only one of the two interfaces work, or will cause interference.

Model selection examples.
1i SYAD02B-A4 Two channel 4-20ma signal output
2i SYAD04B- A7 Four channel 0-A 20mA signal output
3i SYAD02B- U1 Two Channel 0-5V signal output

2-ch/4-ch Isolation A-D Converter General Parametersi
(typical @ +25a i Vs@ 24VDC)
Inputi Voltage / Current
Accuracyi 0.05%
put imbalanceIni A 0.1 uA/a
Temperature Drifti A 15 ppm/a (A 30 ppm/a , max)
Input loadi
50IC (4-20mA/0-20mA/0-A 20mA current input)
100IC (0-10mA/0-A 10mA current input)
1KIC (0-1mA/0-A 1mA current input)
>1MIC(voltage input)
Band widthi -3 dB 10 Hz
Switching ratei 10 Sps

Common mode restraint(CMR)i 120 dBi 1kIC Source Imbalance @ 50/60 Hzi
Normal mode restraint(NMR)i 60 dB i 1kIC Source Imbalance @ 50/60 Hzi
Input terminal protectioni over-voltage/over current protection
Communicationsi protocol RS-485 or RS-232 ASCII character communication protocol and MODBUS RTU communication protocol
Baud ratei 300a 600a 1200a 2400a 4800a 9600a 19200a 38400bpsi software selectable
addressi 00H~FFHi software selectable
Response Timei 100 ms max
Operation Power Supplyi +8 ~ 50 VDC wide power supply range, internal anti-reverse & over-voltage protection
watt consumptioni < 1W
Operation Temperaturei - 45 ~ +80a
Operation Humidityi 10 ~ 90% (non-condensing)
Storage Temperaturei - 45 ~ +80a
Storage Humidityi 10 ~ 95% (non-condensing)
Isolation withstand voltagei between input and outputi 3KVDCi 1 minutei stray current 1mA
Output and power are common-ground.
Impact Resistancei 3KVACi 1.2/50us(peak value)
Dimensionsi 123 mm x 70 mm x 30mm
Weighti approximately 72g