4 Inch Hollow Fiber Uf Membrane Modules

Following are the Main Feature of 4 Inch Hollow Fiber UF Membrane Modules :
1. Comparing to the product of the same kind and specification product, length is lengthen 100mm and membrane area increase 15% in the result of raising of water yield.
2. Conglutinating the joint of shell by France gumwater make sure it not leak and break and perfectly reach sanitation standard.
3. The shell making of UPVC is more flexible, resistant to aging, able to bear acid and alkali, and applicable for widely operating condition.
4. Besides UPVC, there are ABS and organic glass to choose.

Technical Parameters :
Overall dimension: I 90A 1192mm
Interface dimension: I 32 (DN25)
Pure flux: >2050L/H
Connection Mode: slipknot adhesion
Shell material: UPVC, ABS, organic glass
Membrane filament material : hydrophilic PVC
End seal material : epoxy resin
Configuration : hollow fiber
pH range : 2~13
Max TMP : 0.2Mpa
Continuous Tolerance to chlorine : 100ppm
Tolerance to chlorine for short-term : 200ppm
Max inlet pressure : 0.3Mpa
Filtrate turbidity : < 0.1NTU
Product water SDI : < 1
Removal rate of animalcule and bacterium : 99.99%
Removal rate of suspended solids : 100%