Tensile strength tester

Tensile strength testers and elongation are the two prime characteristics of most of the raw materials, whether they are metals: or non-metals: such as rubber, textiles, plastic, paper: or finished products such as rods, wires, ropes, yarns, belts etcetera. These properties very often play the major role in determining the suitability of any raw ma...

DRK101D Tensile Strength Tester is applicable in many properties test of plastic films, complex films, flexible packaging materials, adhesives, adhesive tapes, glue, rubber, paper, and plastic aluminum board. The test items include Tensile, peel, ripping, hot-seal, shear, etc.

The Tensile Strength Tester is applicable in testing the rubber, plastic film, cable, fabric, paper, aluminum board, textile, fabric and so on. It can do the test of tensile, compression elongation ratio test, hot seal strength, tearing strength, 180 degree peel (include T peel), and 90 degree peel, etc.

We are offering our client an excellent quality range of Tensile Strength Tester. Tensile strength and elongation are the two prime characteristics of most of the raw materials, whether they are metals: or non-metals: such as rubber, textiles, plastic, paper: or finished products such as rods, wires, ropes, yarns, belts etcetera. These properties ...

This Tensile Tester applies to metal, plastic, rubber, fabric, Synthetic chemical, cable, leather test and etc...., It can test the physics capability of various material, finished products, semi-manufactured goods. Using different clamp can do resistant pull test, resistant press test, bending test, tearing test etc... Instructions Test method: ...

The maximum tensile force the test piece will stand before it breaks and the elongation at the moment of rupture are measured. Range 0-30 Kg. Or 300 N., 0-60 Kg. Or 600 N. Available in higher Load Capacity model

Tensile Strength Tester in various ranges & specifications.

Tensile Strength and elongation are the two prime characteristics of most of the raw materials, whether they are metals; or non-metals such as rubber, leather, textiles, plastic paper; or finished products such as rods, wires, ropes, yarns belts etc. These properties very often play the major role in determining the suitability of any raw material ...

TENSILE STRENGTH TESTER FOR FABRIC, YARN LEA.

Salient Features of Electronic Tensile Strength Tester :- 1. Electronic Tensile strength tester with digital readout for load and elongation, with peak hold facility for load and elongation, electronic sample break detection, overload and over travel protection, necessary spares & accessories. 2. Tensile tester motorized operated with load and el...

This is a Single-Column generic Tensile Testing machine which can be designed to perform any or all of the following tests with high accuracy : 1. 180% Peel Strength Tester of Pressure Sensitive Adhesive Tapes / Labels. 2. Inter-Layer Bond Strength Test (T-Peel Test) of Laminates. 3. Seal Strength Test of Laminates 4. Tensile Stre...

Our clients can avail from us an excellent quality range of Fabric Tensile Strength Tester With Constant Traverse Speed. Our Fabric Tensile Strength Tester falls under the category of Fabric Testing Instruments. Fabric Tensile Strength Tester with Constant Traverse Speed has mounted floor with rugged steel body. The auto self aligning jaws and doub...

These high quality electronic tensile strength tester are made by using very high quality raw material which ensures hassle free work performance at its user end. These electronic tensile strength tester are widely finds its applications in various industrial sectors.

Salient Features of Fabric Tensile Strength Tester :- # Determines tensile strength of fabrics. # Maximum capacity 1000Kg. Accuracy upto 100gms. # Fully Digitalised user friendly control panel. # Jaw separation from 25 mm upto 450mm. # Complete with all accessories including templates & 6 mm gauge. # Weight: 189 Kgs. (416 lbs)

TO MEASURE THE STRENGTH OF SAND AT WET ZONE. CONSISTS OF HEATER TO HEAT UP TO 300 DEGREE CELSIUS, STRENGTH MEASURING MECHANISM. WORKS ON 230v, 50Hz.

Horizontal Model Digital Tensile Strength Tester in various ranges & specifications.

This Tensile Strength Tester - Microprocessor Based Model is used for providing rapid and efficient determination of tensile strength and Tensile energy absorption of paper and paperboard with in-built printer and imported load cell and imported DC Drive. This Instrument is equipped with memory for retaining peak value of load, automatic zero setti...

Our range of HD-619 Economical Single Column Tensile Tester is available with following specifications:- Mode HD-619 Capacity (optional) 20kg, 50kg, 100kg, 200kg Unit (Switchable) KG, N, LB Load Resolution 1/10,000 Load Accuracy ± 1% Stroke (exclude the grips) 400mm Test speed 20~300 mm/min selectable Display LCD Motor adjust...

FOLLOWING ARE THE SPECIFICATIONS OF TENSILE TESTING MACHINE: SPECIMENS : Wire & Plywood. MAXIMUM CAPACITY : 10, 20, 50,100, 200, 250, 500, 1000, 2000, 2500, 5000 Kgf. WORKING SPACE : 1000 mm. LEST COUNT : 0.1 mm. STRAINING FREQUENCY : 50 &100 RPM. OR 100, 200, 300 RPM. INDICATION : Digital Load & Extension. WEIGHT MEASURES :K.G.F. or K.N....

Microprocessor Based Tensile Strength Tester The Tensile Test is used to test tensile of paper. A test pieces is clamp between two jaws without slipping and pulling apart so that he breaking occurs. The maximum load at which the sample breaks measured by load cell Tensile strength The maximum tensile force the test piece will stand befo...

Following Details of Tensile Testing Machinery : For Checking Tensile Strength of Fabric / Yarn Lea Digital Tensile Testing Machine – 500Kgf with S Type Load Cell Least Count - 0.1Kgf Traverse Speed - 300 & 100mm /min. Max. Grip Separation –1000mm Min. Grip Separation – 100mm Power - 220 V AC 50 Hz. Drive – 1H.P. Geared...

DIGITAL TENSILE STRENGTH TESTER

Tensile Strength Tester For measuring the strength of various materials we are offering a wide assortment of Tensile Strength Tester. This tester is lab tested for its various applications and availability to perform in industrial environments. Due to its advanced features and capability of being connected with the computer, the tester does not re...

Labthink XLW (PC) Auto Tensile Tester is applicable in the test of physical mechanical properties of plastic films, laminated materials, flexible packaging materials, plastic flexible tube, adhesives, adhesive tapes, pressure sensitive tape, adhesive bandage (plaster), release paper, protective film, flip off cap, foil, diaphragm, back sheet, non-w...

This YL-1109 Peel Strength Testing Machine is designed for conduct tensile, compression, bending, shearing, bonding strength, peeling, tearing and other tests for rubber, plastic, leather, metal, nylon line, fabric, paper, aviation, packaging, construction, petrifaction, electrician, vehicle and other materials. It is a basic equipment of quality c...

This Tensile Strength Testing Machine can test tensile, tearing, peeling, adhesion strength and other resistant properties of various materials, with elongated value (extensibility) display. Display and switchable force unit (N, kN, g, kg, Lb, kP) Display and switchable distortion unit (mm, cm, inch) Display and switchable stress unit (MPa, kg/...

We are offering our customers a wide range of Rota Beaker Dyeing Machine, which are available following Features :- * Micro processor based temp. control * 22 RPM * Heating Medium – Water (99 ° C max) * Available in standard two models: 12X250 ml. and 18X250 ml. and custom design also. Our range of Rota Beaker Dyeing Machine is available at...