Rheostat

Our Laboratory Rheostats are simply & sturdily made. Each Laboratory Rheostats consists of wire winding on a vitreous enamelled tube which is held between cast aluminium end support. Laboratory Rheostats are available in various ranges.

* Rotary Rheostat * 25 W to 500 W· * Range 0.1W to 1kW * Tolerance 5% to 10% * Available in bank in IP enclosure

These Power Rheostats are made with a variety of resistance & current carrying capacity so as to satisfy every need. They are wound with heavily oxidized eureka resistance wire upon a porcelain tube dia 44 mm aprox. The tube is carrying upon Bakelite rider and the heavy duty sliding contact is of the phosphor bronze with brass rod. 4 mm socket term...

We have an excellent quality range of Rheostat Protected. Variable up-to 345 ohms at 1.2A rating, for use as a series resistor or a Potentiometer Enclosed type, in metal case with windings on porcelain former 350mm long x 56mm dia, three 4mm socket terminals and four mounting lungs topped OBA.

Salient Features of 4 Tubes Ganged Rheostat :- 1) Core Porcelain Tube, Non-Magnetic Non-Inductive Tubular Type. Diameter and Length of coreis given in the table below. 2) Contact Block : Squire piece made of material is fitted with contact sliders in the guide squir rod. Bright chrome plated Phosphor bronze strip which makes immediate contact wit...

Power Rheostats are made with a variety of resistance & current carrying capacity so as to satisfy every need. They are wound with heavily oxidized eureka resistance wire upon a porcelain tube dia 44 mm aprox. The tube is carrying upon Bakelite rider and the heavy duty sliding contact is of the phosphor bronze with brass rod. 4 mm socket terminals ...

In Industrial type toroidal power rheostats, we use high quality insulation graded ceramic cores which are tough in strength and uniform in size & manufacturing process is as same as Resistor manufacturing that starts right from selection of cores, selection of wire and the insulation coating (silicon coating) process, the thing which differs here ...

PARAMETERS OF RHEOSTATS :- * TYPE : ORP. * POWER : 25 W ~ 500 W. * RESISTANCE RANGE : 1 R - 100 K. * TOLERANCE : +-10% ~ 20%. * TCR : +-350 PPM/ DEG. C.

Comprising a layer of resistance wire wound on an insulating heat resistance tube (Porcelin) which is supported by cast metal feet. A sliding contact and three 4mm socket terminals are provided, one terminal being connected to the sliding contact and the other two to the ends of the winding, enabling the unit to tbe used as rheostat or potentiomete...

With protected cover, newly designed, wounded with heavily oxidized resistance wire upon a tube. Fitted with 4mm. safety socket terminals. Resistance ± 10% compared to nominal value. Resistance Ohms Current Amp 10 4 10 5.6 33 2.2 33 3.1 100 1.25 100 1.75 330 0.7 330 0.95 1000 0.4 1000 0.5

Rheostat Rheostats are used as series resistors or potentiometers. Open slide wire type with a variety of resistance and current carrying capacity. Copper nickel alloys wire is oxidized to provide perfect insulationRheostats are used as series resistors or potentiometers. Open slide wire type with a variety of resistance and current carrying capac...

Power Rheostats are made with a variety of resistance & current carrying capacity so as to satisfy every need. They are wound with heavily oxidized eureka resistance wire upon a porcelain tube dia 44 mm aprox. The tube is carrying upon Bakelite rider and the heavy duty sliding contact is of the phosphor bronze with brass rod. 4 mm socket termin...

Rheostat , device whose resistance to electric current depends on the position of some mechanical element or control in the device. Typically a rheostat consists of a resistance element equipped with two contacts, or terminals, by which it is attached to a circuit: a fixed contact at one end and a sliding contact that can be moved along the resista...

We providing Rheostat, which is used as series resistors or potentiometers. Copper-nickel alloys wire is oxidized to provide perfect insulation with a variety of resistance and current carrying capacity.

Rheostat, Open Type Insulator tube, wound with oxidized Eureka wire and mounted on bakelite frame, is provided with laminated brush contacts of phosphor bronze strip, nickel plated rod and 4mm socket terminals. Can be used as series resistance or potential divider. Max. Current Resistance Tube Size -01 ...

Laboratories Rheostat 1855+56 We offer Rheostat 1855+56. A layer of oxidized resistance wire is wound on a porcelain tube which is supported by end supports and a sliding contact and 4 mm socket terminals are provided in the structure of Electronic Rheostat.

Rheostats Rheostats are mainly used for regulating electric current in industry and laboratory where these are used as adjustable resistors in electrical circuits. With three terminal provisions, these can be used to vary a d c potential smoothly from zero to maximum.

Sliding Rheostat We offer heavy duty industrial type sliding Rheostats that are adequately designed and are silicon coated open type equipment. Being open type and slide wire type, sliding rheostats offers a varied resistance power and current carrying capacity.

We are into manufacturing of electronic and electrical products like Wire Wound Resistor, breaking resistors, sliding rheostat, torodial rheostat , resistive load etc. Our Wire Wound Resistor are used for various applications in many sectors like Motor Industries, textile equipment, Crane & Lift Industry, Railways, Educational institutions etc. Wir...