We offer vertical coal & multi fuel fired thermic fluid heater.

Vertical / Horizontal
(Coal, Husk, Wood Waste,
Bagasse Fired, Thermic Fluid Heater)

Capacity : 1,00,000 K.Cal/Hr. to 20,00,000 K.Cal/Hr.


HEATEX - VT - THERMOPAK

DESIGN & CONSTRUCTION

THE THERMIC FLUID HEATING SYSTEM
The "HEATEX - VT - TH" is forced circulated thermic fluid heater. The Thermic fluid is pumped and circulated in a closed circuit and the heat is generated for the process. The same Thermic fluid is used over and over again.

HEAT EXCHANGER
An integrated combustion chamber is arranged as a nest of concentric coils are placed within 3 sturdy shell of mild steel. The concentric helical tube coils allow 3 flue passes, so as to ensure optimum rate of heat release and maximum heat transfer. The designavoid extensive use of refractory material with all standard accessories, is mounted on a sturdy steel skid for easy installation.

EXTERNAL FURNACE
Coal/Lignite/Wood/Husk or agro waste is burnt in an external furnace. This avoids any possible damage to the thermic fluid heater coil. Emergency chimney is provided as safe-guard against power failure.

FURNACE DESIGN
The whole furnace is enclosed in steel casting. The combustion chamber is constucted with best quality high duty heat firebricks and insulation bricks. Air insulation is provided to minimize the heat losses.

DESIGNED FOR LOWER GRADE COAL
The volume of the furnace and gate area are specially designed for firing with low grade coal having lower calorific value.

HIGH COMBUSTION EFFICIENCY
The design incorporates the balance draft system, with forced draft fan for primary and secondary air and induced draft fan. This ensures high thermal efficiency and complete combustion of volatile.

HIGH THERMIC EFFICIENCY
The 'Heatex Thermopak' incorporates 2 pss design and constantly gives an efficiency of around 70%

SALIENT FEATURES
A. DESIGN
CO in fuel gases will be at 11%
Full combustion of coal giving maximum heat output Stack temperature only 50 C more thatn oil tempature. Expansion cum deaerated tank is designed in such a way that there are no chances of air pocket in the heater.

B. AUTOMATIC AND ACCURATE CONTROL OF TEMP
The control panel for the remote operation of the 'HEATEX' thermic fluid heater incorporates electrical safety devices and controlling equipments of unit. The electronic temperature controllers for oil circuit etc. are housed in the control panel. The electronic temperature controllers are interlocked with the ID fan which is switched off automatically when the forward and return oil temperature exceeds the set temp., when the temperature comes down. The control panel for the remote operation of the heater incorporates full complement of safety interlocks, indicators & alarms

C. RUNNING COST ECONOMY
(1) No corrosion or scale - formation. The Thermic fluid have mineral origin.
(2) Maintains constant temperature of 300 C at normal atmospheric pressure
(3) Exempted from statutory inspections and Indian Boiler Regulation Act.
(4) Economically operated and easy to maintain, easy availability of parts.

D. MULTI FUEL OPTION
The system is most suitable for Coal, Wood, Husk, Bagasse, Lignite etc. wih optimum output level with some modification in combustion chamber. Service is given on clients demand.


For indirect heat process in
Textiles Chemicals Leather
Plywood Laminates Dehydration
Dairy Pharmaceuticals Oil Refineries
POY Packaging etc.

Please contact us for more details.