We offer Exera Vidio System Center Cv-160.
Designed exclusively for the EVIS EXERATM
160 Series, the CV-160 features a leading-edge video signal processing technology configured to frequency components specifically suited for endoscopic images, allowing it to enhance details while simultaneously suppressing noise. The result is a more detailed image that makes it easier to spot minute tissue textures and subtle color variations on the mucous membrane. As for versatility, the CV-160 video system center can also accommodate EVIS EXERATM video bronchoscopes so you can use the same system for both gastrointestinal endoscopy and bronchoscopy. It's also fully compatible with the EVIS 100/130/140 Series gastrointestinal scopes.




CV-160 video system center
Observation Video signal output VBS composite, Y/C, RGB; simultaneous output is possible.
White balance By pressing the white balance switch on the front panel, automatic white balance can be performed. After initialization, white balance settings are retained in memory for EVIS EXERA 160 Series scopes.
Standard color chart output The color bar image can be displayed using the "Color Bar" key on the keyboard.
Digital communication port Ethernet (100BASE-TX)
Color tone adjustment "CHROMA" control: 7 steps, "R" control: 7 steps, "B" control: 7 steps
Automatic gain control (AGC) The image can be electrically amplified when the light is inadequate due to the distal end of the videoscope being too far from the subject.
Contrast Normal Contrast mode: Normal image; Low Contrast mode: The dark areas are lighter and the light areas are darker than in a normal image; High Contrast mode: The dark areas are darker adn the light areas are lighter than in a normal image.
Iris mode selection Average: Normal observation; Peak: When focusing on and/or observing a small bright area.
Structure enhancement setting The detailed patterns and edges of endoscopic images are emphasized electronically to increase image sharpness. The structure enhancement level can be switched between "Low", "Medium" and "High".
Edge enhancement setting The edges of endoscopic images are emphasized electronically to increase image sharpness. The edge enhancement level can be switched between "Low", "Medium" and "High".
Image size selection The size of endoscopic images can be changed using the "Image Size" key on the keyboard or endoscope switch.
Default reset The following settings can be restored by pressing the "RESET" switch on the front panel: Image Source, Iris, Enhancement, Color, AGC, Display mode, Contrast, Printer Lock, Keyboard mode, Printer mode, Printer QTY.
Freeze screen display A stationary image can be displayed using the endoscope switch, keyboard or OVC switch.
Documentation Remote control The following ancillary equipment can be controlled by the endoscope remote switch, the front panel and the keyboard (only the specified device types are valid): Monitor, VTR, Video printer equipment, Digital video cassette recorder, Flushing pump.
Patient data The following data and modes can be displayed on the video monitor using the keyboard: 1) ID number 2) Patient name 3) Sex, age 4) Date of birth 5) Date/time (built-in clock, stopwatch) 6) Frame number 7)VTR condition 8)Picture quality selection 9)Physician 10)Comments
Pre-procedural patient data For a maximum of 40 patients. 1) ID number 2) Patient name 3) Sex, age 4) Date of birth 5) Physician
Recalling and registered scope information (scope ID function) The following scope-related data stored in the memory chip of the scope can be recalled and displayed on the screen: Scope Model, Serial No., Comments, Cumulative Uses, Check Period, Service Contract, Warranty Date, Owner, Customer ID No., ID Ver.
Image storage and retrieval Monitor output Using the monitor output switch on the front panel, it is possible to select an image from the endoscope of ancillary equipment for display on the monitor.
Memorization of selected setting The following settings on the front panel are retained even when the power is turned OFF: Color, Enhancement, White balance, Iris.
Classification (medical electrical equipment) Type of protection against electric shock Class I
Degree of protection against electric shock of applied part Type BF applied part (the applied part where classification types are not marked is Type BF applied part).
Power supply Voltage NTSC 100-120 V AC, PAL 220-240 V AC
Frequency 50/60 Hz
Input current NTSC 1.0 A, PAL 0.5 A
Fuse rating 3.15 A, 250 V
Size Dimensions 370 (W) x 72 (H) x 420 (D) mm
Weight 8 kg

For more details please contact us.