We offer Hydro Silicone Oil. Item#: GM-SF1 Description: methyl hydrogen silicone fluid Function: It is widely used as water proof agent, anti-adhesive agent or anti-corrosion agent etc. Specification: Appearance: Transparent liquid Density (25 degree centigrade,g/cm3) : <1.105 Viscosity(25 degree centigrade, mm2/s) :10~50 Contain the hydrogen(%):1.58~1.63 Refractive index(D25n):1.390~1.410. Please feel free to contact us.

Description: 1. Wash and clean molds with detergents dry the molds and use an air gun if necessary and apply a film of mold release 2. Determine the normal proportion of pad printing silicon and silicon oil on the basis of customer requirements Add more silicon oil if a larger area of printed pattern and therefore soft rubber head is needed by the customer. 0therwise, add less or no silicon oil for better hardness. For normal pad printing rubber head, hardness between 15A-25A will be appropriate If excessive amount of silicon oil is added the number of printing will be limited by an extremely soft rubber head and the molecular weight of silicon of however supreme quality will be destroyed by silicon oil, and therefore the phenomenon of compromised resistance to abrasion solvent and aging. 3. The normal proportion is as follows 100g silicon admixed with 30g silicon oil for a hardness of 20A will be suitable for pad printing for alloy toy cars and products with small patterns and contact area If larger pressure contact surface or soft rubber head is required the silicon and silicon oil proportion can be adjusted to 1003010050 and so on Remember the more silicon oil is added the softer the rubber head will be and the number of pad printing resistance to abrasion and solvent will be under mined and hence heightened cost and more material waste 4. Ad mixture amount of curing agent and chemical reaction of silicon eg., mix 100g of silicon with 50g of silicon oil after they are sufficiently and evenly mixed add curing agent as per 2 of the total weight of sillicon and silicon oil mix again for 23 minutes before exhausting. Generally exhausting duration can not exceed 10 minutes otherwise the silicon will harden quickly to an effect the quality of molding. Kindly, mail us for more information.

SUPREME SILICONES : omkarkamble(at)rediffmail.com COMPOSITION Activated Silicone Fluid TYPICAL PROPERTIES Appearance : Translucent Viscosity : >2000 cSt Solid Content : 100% Diluents : Kerosene, Toluene, Benzene, Xylene Performance : <15 FEATURES Stable over wide pH range. Very good foam knock down performance. Excellent foam control persistence. Easy to disperse in non-aqueous systems. Complies with key chemical control laws and regulations. BENEFITS Excell

We offer Neoprene hose that is made of 2-ply glass fiber fabric and coated by neoprene. And spiral spring hidden between the 2 ply. The most advantage is to anti-oil and anti-ozone. Feel free to mail us your requirement.