The Sigma Trac linear motor table is a pre-engineered, easily mounted, plug-and-play, ready-to-run package. The linear motor magnet track is mounted to the machined aluminum base and the motor coil is mounted to the moveable carriage. The only contact between the carriage and the base is through caged ball linear guide support bearings. With peak force ranges from 86 to 1200 N and stroke ranges from 100mm to 2 m (other strokes available), the modular Sigma Trac Series slides are ideal for a wide range of precision positioning and general automation applications. For any further query kindly contact us.

Servo planetary gearbox Ratio : 3～512 Size:40～420mm Torque:5～20760Nm Precision:＜5arcmin Noise: ＜65db Stable performance, compact structure, high input speed, big output torque. clamping ring locking structure, ensure the free backlash power transmission and the coaxiality of junction surface in a high input speed condition.. The input end adopts modularity design, so that it can match with any brand of motor.

The motors have angled connectors for the power supply and the feedback signals. Beckhoff offers the resolver, encoder and power leads as a ready-assembled accessory. The motors are optionally available with an integrated stop brake. This holding brake (24 V DC) locks the rotor when power is removed. When the brake is released, the rotor can turn without residual torque. Operation is free from backlash. The stop brake can be driven directly by the servoamplifier. Properties : * high dynamic performance caused by neodymium magnets * flange dimensions meet IEC standard, fit j6, accuracy according to DIN 42955, tolerance class R * vibration class N according to DIN ISO 2373 * insulation material class F according to DIN 57530 * style IM B5 according to DIN 42950 * shaft end without keyway to DIN 748 * protection class IP 65 * shaft bush to IP 64, optionally with shaft sealing ring to IP 65 * nominal mains voltage 400/460 V * long service life through brushless technology * integrated resolver * optional single-turn or multi-turn absolute encoder

* Best for applications that require stable speed}control, precise positioning, quick response and accurate torque control.Very compact, rugged and reliable. Image * From 0.016Nm rated torque to 68Nm rated torque * Rated speeds 1000 to 5000 rpm. * Peak speeds from 2000 to 6000 rpm. * Low, Medium and High Inertia models. * IP 65 class * With 2500ppr incremental encoder or 17 bit absolute encoders. * With brake, shaft sals and planetary gear heads as options. * Can be run on 220V, 50Hz, Single phase Input upto 750W. * Higher capacity drive works on 200V / 400V, 3 Phase Input. Drives with 400V 3 Phase input are also available. * Can do Position, Speed and Torque control. * Standard +/- 10V Analog interface, Pulse & Direction interface and quadrature encoder input interface. * Dynamic brake and Regenerative discharge resistors are built in.