ROAD MARKING PAINTS Shalimark Cold Applied Reflective Road Marking Paint Water Based Very low VOC Low Energy Requirement Easy Repainting Operation

Ugam Roadmarking Cold application road marking paints with glass beads having excellent light reflectance, and tough coating based on acrylic latex. Widely used on highways and for industrial markings. Ugam Roadmarking hot melt type coatings are in powder form. Ugam Roadmarking hot melt are heated in machine and applied with spray and glass beads are spread over before cooling. Ugam Roadmarking hot melt type coatings are widely used for highways marking.

Thermoplastic Road marking Paints Thermoplastic road marking paint is a dry blend, which is melted, at 150 – 200 deg c and applied on road surfaces as dividing lines. Thermoplastic paint can be applied on asphalt and concrete surfaces (with special primer). It has many advantages over the conventional paints, It is long lasting and stays on road for years without Fading, it has little or no volatiles, it is Quick drying, Has low cost, Offers good luminosity in Dark and Heavy rains, is antiskid and water proof.

UCRP100 UCRP100 hydrocarbon petroleum resin is a Maleic Anhydride modified aliphatic resin with a unique combination of light color, low odor designed for high class Hot-melt Thermoplastic Road Marking Paint. Good flowage High drying rate High abrasion performance Good heat stability and suitable for all weather Even distribution of filler material without settling Appearance: Yellowish Granule Color (Gardner in 50% toluene): 5.0 max Softening Point (Centigrade Ball): 98-105 Ash Content (wt.%): 0.03 max Acid Value (mg KOH/g): 0.80-2.0 max Flash Point (Centigrade): 275 min Heat Resistance (200 Centigrade 2h Gardner): 7 max Specific Gravity (20/20 Centigrade): 0.97 UCRP110 UCRP110 hydrocarbon petroleum resin is an aliphatic resin with a unique combination of light color, low odor and high softening point designed for Hot-melt Thermoplastic Road Marking Paint with the following characters. Competitive in price High abrasion performance Good flowage and high drying rate Good heat stability and suitable for all weather Even distribution of filler material without settling Appearance: Yellowish Granule Color (Gardner in 50% toluene): 5.0 max Softening Point (Centigrade Ball): 108-114 Ash Content (wt. %): 0.03 max Acid Value (mg KOH/g): 0.20 max Flash Point (Centigrade): 275 min Heat Resistance (200 Centigrade 2h Gardner): 7 max Specific Gravity (20/20 Centigrade): 0.97