Remote Controlled Switch Board with 5 on/off, 1 5Amp. Plug and 2 Fan controller Based on PIC16f72

A PART FROM THE VIRTUE OF BEING USER-FRIENDLY AND EASE FULLNESS OF OUR REMOTE SYSTEMS, THEY ARE ALSO PROVED TO SAVE ENERGY. IT IS, AS SUCH, CONTRIBUTING TO THE NATIONAL EFFORTS TO SAVE ENERGY. THE SAFETY ASPECT OF THE REMOTE PRODUCTS SHOULD ALSO NOT BE WINKED AT. YOU CAN OPERATE YOUR LIGHT AND FANS FROM ANY CORNER OF THE ROOM WITHOUT TOUCHING TO THE MIN BOARD AND MAINTAIN SAFETY OF YOUR CHILDREN ANS SAVE THEM FROM ELECTRIC CURRENT.

Touch-screen remote control switch: Applicable range: Family, office, market, hotel, hospital, warehouse etc. Product parameters: 1. Ultrathin, pure flat style, remote control 86*86*28mm 2. Operating voltage:AC110~240V AC180~250V(50/60Hz) 3. Operating frequency: 315MHZ 433MHZ 430MHZ 303MHZ 4. Ultra-low power consumption design and standby electric current: 220V 50uA(power consumption is less than 0.01W) 5. Distance of remote control: within 50 meters(you can choose any type of the remote controller of our company) 6. Load power: the maximum resistive load of single route is 500W. 7. Environmental temperature : -4F~176F 8. Sensitivity: -105dB Product characteristics: 1. Convenient installation----replace the original wall switch directly and there is no need to change the connections of the lamps and lanterns. 2. Applicable lamps and lanterns----fluorescent lamp, energy-saving lamp, incandescent lamp, spotlight, halogen lamp etc. 3. Lightning protection design----holding the lightning protection function, safe and reliable performance. 4. Partition remote control----remote control behind partition wall(you can remote control the lamps of the living room in the chamber) 5. Non-interference----non-interference among the products of the same type in the neighbors. 6. Keeping off when electricity coming----after power cut, the switch keeps off to avoid waste of electricity.

4x4 HDMI switch metrix with IR Remote Control and RS232 Control; Compatible with HDMI 1.2 /1.3 and HDCP Resolution supports: 480, 720, 1,080p and 1,080i Plug-and-play function No software installation is needed Video amplifier bandwidth: 1.65Gbps Input video signal: 1.2Vp-p Input DDC signal: 5Vp-p (TTL) Resolution: 1,920 x 1,200 pixels HDMI input/output (interface): type A 19 pin female Remote control end: RS232 female and mini-stereo Power supply: 24V DC Maximum power consumption: 60W Dimensions: (L) 43.4 x (W) 13.8 x (H) 4.4mm Net weight: 1,565g OEM and ODM orders are available