We also manufacture the laboratory oven which is a double walled, with inner and outer chamber made of Mild Steel / Stainless Steel 304 quality . Glass Wool 50 mm is used for insulation, in-between the two chamber walls. Door is insulates with asbestos gasket. Adjustable ventilation is provided. Heating elements, made of Nochrome 80/20, are places at the bottom of the chamber. Temperature is controlled with the help of a capillary thermostat. 3-heat switch is provided for power saving. Ovens are electrically operated at 230 Volts, AC, Single Phase, 50 Hz supply. Please, Feel free to contact us.

Digital Conductivity Meter are reliable and accurate test instruments for measurement of conductivity of aqueous solutions. They measure Conductivity in five ranges. The resolution is 0.1 µS/cm respectively, in the lowest range. The cell constant is flashed on a digital display & can be adjusted from the front panel. The instruments have the "Check" facility to calibrate the instruments. The Instrument are ideal for monitoring salt contents in water and soluble salts in soils. They are extremely useful instruments for agricultural and soil analysis labs, swimming pools, fertilizer plants, petroleum, refineries, textiles plants etc. SPECIFICATIONS Display : 3½ Digit LED Measurement : Conductivity Ranges : 0 to 200 µS/cm 0 to 2 mS/cm 0 to 20 mS/cm 0 to 200 mS/cm 0 to 1000 mS/cm Accuracy : ± 1% FS ± 1 Digit Temp. Compensation Auto : 0 to 50ºC Manual : 0 to 50ºC Cell Constant : Adjustable on Digital Display Measuring Cell : Platinum DIP Type Resolution : 0.1 µS/cm Power : 230V ± 10% AC, 50 Hz Dimensions : 76 x 275 x 175mm Sensor : Conductivity Cell

Our range of laboratory equipments also includes ovens that aid the functioning of varied chemical industries. It is largely used for varied experimentation and manufacturing processes which require heating. It has a double walled structure with the inner chamber being made up of aluminum and stainless steel sheet. The outer body is made up of thick mild steel sheet. There is a gap of 7.5 cms between the chamber and the body. This is filled with good quality of glass wool for proper insulation. An air ventilator is also provided at the top of the oven to prevent its over heating. The chamber has 2/3 adjustable shelves for easy operation. It also has double walled door which is fitted with an automatic roller. Further it has To and FRO latch the body, which is finished with gray hammer-tone or white paint. The oven does not have a thermometer but is provided with a continuous variable thermostat which controls the temperature from 10° C above ambient temperature to 250° C within the accuracy of ± 1° C. A heating element is wounded along with sides and bottom of the oven. Complete with two pilot lamps cord and plug pin etc. It works on a voltage of 220/230 volts 50 Hz. A.C.

I Suitable Scope It is applicable to such tests as drying heat treatment.etc.of artides under vacuum conditions in industrial and mining enterprises as well as in medical colleges and scientific research institutes. II Characteristics of product 1 The working chamber is rectangular so as to achieve the maximum of effective volume. 2 Toughened bulletproof double glass door,to observe clearly the object in the working chamber. 3 The air-tightness of the chamber door is adjustable,with a wholly shaped silicon rubber door sealing loop;so as to guarantee in-chamber high vacuum. 4 The working chamber was made of high quality sheet steek or corrosion-resistant stainless steel,safe and easy to use. 5 Intelligent temperature controller was based microprocessor with PID parameters controlling function.Digital display of set and actual temperatures.High temperature controlling accuracy and reliability. III Technical date:ModelDZF-6020DZF-6021DZF-6050DZF-6051DZF-6090DZF-6 Please feel free to contact us.