11kv Sf6 Load Break Switch Panels

These 11kV SF6 Load Break Switch Panels are manufactured suitable for free standing enclosed in galvanized sheet steel enclosure. The PCES SF6 12 LBS is fully type tested as per IEC- 62271-100.The total cubicle is architecturally divided into independent compartments.
The switch compartment is leak proof epoxy container in which making and breaking will take place in insulating and arc-extinguishing medium Sulfur Hexafluoride gas (SF6). Due to SF6 media the size of the switchgear is compact.
The bus bar compartment is located in the upper part of the cubicle, is also used to make electrical connection between the cubicles.
Cable termination compartment is located in the lower part of the cubicle and also contains the earth switch which is interlocked with main switch.
The control compartment is located in the upper part of the cubicle and contains the terminal blocks with control signals properly identified.
The operation interface is located on the front part includes a customized mimic diagram for each type of cubicle. It provides access to manual operation of the disconnect driving mechanism, spring charging and indications.