Continuous Lead Sheathing Extruder Jql-150/5

These Continuous Lead Sheathing Extruder JQL-150/5 system is for lead sheath extrusion of cables and lead covering of vulcanization of rubber tubes. Diameter range of lead sheath extruded is from 10mm to 110mm. There are two types of die rack. One is for dia. between 10mm to 80mm, and another is for dia. between 40mm to 110mm. Customer could choose one type or both types.
Both pure lead and lead alloy could be extruded properly by the machine. There are generally 4 types of lead alloys like the following:
a.Alloy of lead and antimony, percentage of antimony 0.5%-0.6%.
b.Alloy of lead, tin and antimony:
Percentage of tin: 0.4%, percentage of antimony: 0.2%
c.Alloy of lead, tellurium and copper
Percentage of tellurium: 0.04%
d.Alloy of lead, tin and cadmium
Percentage of tin: 0.2%

1.Main Composition:
18-ton lead smelter
10-ton holding & cleansing furnace
Vertical type lead sheath stripper
Lead strip conveyor & feeder
Main engine and extruder
Take-up
Control panel

2.Main Technical Data:
Diameter of lead sheath extruder screw: 150mm
Cooling water capacity: 6.8t/h
Rotate speed of screw: 5-150rpm
Total power: 145kw
Turnout of lead extruder:
Pure lead (13-15rpm): 30-35kgs/min
Soft alloy (11-12rpm): 20-22kgs/min
Hard alloy (9-10rpm): 15-16kgs/min
Power of 18-ton lead smelter: 141.1KW
Power of 10-ton holding cleansing furnace: 101.1KW