125khz Access Control Smart Card Reader Support Em And Hid Card

Our company gained expertise in offering a wide range of 125KHZ Access Control Smart Card Reader Support EM and HID Card.

LED/buzzer function description:

LED function: the LED color is normally in red

It starts with 2 green flashes on power up HID compatible card reader and remains red

When a HID proximity card is present to the reader

The LED will shortly flash green, this indicates that the proximity card was read properly by the reader

When the LED control signal is activated by access controller host, the LED changes to green

Beeper function: power up the HID compatible card reader, the beeper will activate 2 times when a HID proximity card is presented to the HID proximity card reader, a short beep will be emitted

This indicates that the HID, proximity card was read properly by the reader.

Specifications:

* Dimensions: 118X53X29mm
* Power requirement: 12DC at 100mA
* A linear regulator is recommended
* Support card: all 125kHz EM-ID/ HID proximity card, such as HID prox II, HID ,EM card or keyfob
* Interface: wiegand 26/34 ,RS232 optional
* Reader range: 5 to 10cm
* Frequency: 125khz
* Operating temperature:-30 to +60oC
* Operating humidity: 5 to 95% RH (relative humidity non-condensing)
* Audio/visual indication: green, red, and buzzer signal output
* Response time: less than 0.2 seconds
* Cable length: 220mm
* Weight:250g
* Wiring:
* Red: DC12V
* Black: GND power ground
* Green: D0
* White: D1
* Blue: LED
* Yellow: Beep