Grease Fidder Unit
Accepts only domestic inquiries
Posted on: 20th February 2009
[India]
We offer Grease Fidder Unit.
This is designed for dispensing high viscosity greases,Heat Sing Paste for high viscosity silicones and greases. suitable for small shots and beads of high viscosity greases.
Please feel free to contact us.
|
Select
|
Resin Mixing System
Accepts only domestic inquiries
Posted on: 20th February 2009
[India]
We offer RESIN MIXING SYSTEM.
MIXER are used for re mixing of Resin and Hardener. A variety of sizes and types is available, including bottom mixing for very high viscosity liquids and top porting for low to medium viscosities.
Please, feel free to contact us.
|
Select
|
Digital Alfa Dispenser
Accepts only domestic inquiries
Posted on: 20th February 2009
[India]
We offer Digital Alfa Dispenser.
The Digital Alfa Dispensar is the latest addition to bench top automatic dispensers. The Alfa has a bright LCD screen and 10 memory locations to automatically cycle though up to 10 self-taught programs.
Features :-
Manual, Timer, or Cycle Operation Modes
Foot Pedal or Finger Switch Controlled
Programmable Timer 0.01 - 99.99 seconds
Suck-Back
...More
|
Select
|
RTV Silicone Dispenser
Accepts only domestic inquiries
Posted on: 20th February 2009
[India]
We offer RTV Silicone Dispenser.
The RTV Silicone Dispenser is a semiautomatic dispensing system, designed to provide precision dispensing of RTV Silicone adhesives or other materials. It is capable of handling viscosities ranging from liquids to pastes. All contact components are constructed of inert materials to allow dispensing of the most High viscous grease and Past.
The RTV Silicon Dis
...More
|
Select
|
Online Meter Mix Dispensing Machine
Accepts only domestic inquiries
Posted on: 20th February 2009
[India]
We offer Online Meter Mix Dispensing Machine.
Standard Features include: Ratio capability over a 1:1 to 10:10 range; ability to interchange dispense cylinders to change ratios; Volumetric capacity of up 05gms. to 70 gms. per cycle (ratio dependent); built in outputs to allow automatic actuation of any type of external dispense valve, static mixing of the two component materials (electrical driv
...More
|
Select
|
Dispensing System Dos A 280
Posted on: 9th April 2009
[Germany]
We offer Dispensing System Dos A 280.
The Dos A280 is a dispensing system for highly abrasive, pasty dispense materials, i.e. thermally conductive adhesives/pastes. It consists of a Scheugenpflug piston metering head with tabletop stand and the A280 material feeding unit with an onboard microcomputer controller.
For handling of:
highly viscous and abrasive dispense materials, i.e. thermal
...More
|
Select
|
Dispensing System Dos A 90
Posted on: 9th April 2009
[Germany]
We offer Dispensing System Dos A 90.
This manual workplace is a computer controlled Metering System consisting of Cartridges or -Tanks, a Scheugenpflug Metering Head Controller and a Scheugenpflug Piston Pump Metering Head with a table top stand.
For handling of:
low volumes of slightly filled materials of different viscosities, with weak tendency of sedimentation.
Area of applicati
...More
|
Select
|
Dispensing System Dos A 220
Posted on: 9th April 2009
[Germany]
The Dos A220 is a dispensing system for feeding highly viscous, pasty dispensing materials. It consists of a Scheugenpflug piston metering head with a tabletop stand and the A220 material feeding unit with an onboard microcomputer controller.
For handling of:
non-abrasive, highly viscous and/or thixotropic materials like sealants, adhesives or greases.
(for abrasive highly viscous materials,
...More
|
Select
|
Dispensing System Dos A 300
Posted on: 9th April 2009
[Germany]
We offer Dispensing System Dos A 300.
The Dos A300 machine is a dispensing system for liquid, self-leveling dispensing materials and abrasive resins. It consists of a Scheugenpflug piston metering head with tabletop stand and the A300 material preparation- and feeding unit with an onboard microcomputer controller.
For handling of :
liquid to medium viscous resins, with or without filling
...More
|
Select
|
Aquason Dispenser
Accepts only foreign inquiries
Posted on: 8th October 2009
[India]
Aquason Dispenser for hand sanitizer gel capacity 1 Litres.
Please feel free to contact us.
|
Select
|
Double Planetary Mixer
Posted on: 14th November 2009
[China]
Double Planetary Mixer offers a solution to a wide range of mixing problems. Designed for intensive mixing, dispersing, kneading, and deaerating products such as adhesives, sealants, light caulks, pastes, coatings, granulations, and similar products of medium to high viscosity. Rotation of the Planetary Blades on their own axis while they travel around the center of the mixing bowl ensures complet
...More
|
Select
|
Hydraulic Discharge Press
Posted on: 14th November 2009
[China]
The Hydraulic Discharge Press system is required to discharge product from mix bowls if the product is not free flowing and cannot be discharged by gravity. Hydraulic Discharge Presses are an essential accessory for the Planetary Mixer and in some cases for the Single, Dual, and Multi-Shaft Mixers. Utilizing this system, products can be easily packed into cartridges, can, pails, or drums.
The P
...More
|
Select
|
High Speed Dispersers
Posted on: 14th November 2009
[China]
High Speed Dispersers is designed for intensive high speed, high shear mixing and dispersing of products such as inks, paints, coatings, adhesives, sealants, various dispersions, and similar products of low to medium viscosity.
The mixers typically consist of a single High Speed Shaft mounted in the center of the mixing bowl. The High Speed Blade is typically a Saw Tooth dispersing blade. Oth
...More
|
Select
|
V-Blenders
Posted on: 14th November 2009
[China]
V-Blenders are in 5, 10, and 15 liter or large size. capacity. Each is constructed of type 316-stainless steel and is internally polished to a 240 grit sanitary finish. The exterior is polished to an easily cleaned 150-grit finish.
All V-Blenders are supplied with Intensifier bars to permit deagglomeration as needed. Discharge is accomplished through a manually operated Butterfly valve. The va
...More
|
Select
|
System Controls
Posted on: 28th October 2009
[India]
We offer different types of System Controls such as:
1. Foot Pedal Start Controls
2. Timed Shot Control Panels
3. Pump Crossover Controls
4. Material Temperature Controls
5. Keypad Interface Panels
6. Panel View Color Touch Screen Controls
7. Advanced PC Color Touch Screen Control
8. Device Net and Equivalent Communication
For more details please contact us.
|
Select
|
Fluid Regulator
Posted on: 28th October 2009
[India]
Fluid Regulator.
Features:
250-4,500 PSI downstream pressure regulator
3/4" NPT(f) Inlet/Outlet Fluid Ports
5,000 PSI maximum inlet
Stainless Steel construction with carbide ball/seat
3/4" NPT(f) gauge port
For more details please contact us.
|
Select
|
Material Temperature Control Units
Posted on: 28th October 2009
[India]
We offer different type of Material Temperature Control Units such as:
1. Peltier Heat and Cool Temperature Units
2. Heat and Cool Water Circulation Units
3. Heat Only Water Circulation Units
4. Electric Heated Hoses and Components
5. High Pressure Co-Axial Jacketed Hoses
6. Water Traced Hose Jackets
7. Water Manifolds & Jackets for Components
For more details please contact us.
|
Select
|
Program-A-Shot Control
Posted on: 28th October 2009
[India]
Features:
Programmable Shot Volume Control
Up to 255 selectable shot sizes
Use with any See-Flo system
For manual and automated dispensing
Low to high flow rate application
Applications: Potting, molding, filling
For more details please contact us.
|
Select
|
2 Nozzles High Flow Rate Fuel Dispenser-Djy-222a
Posted on: 26th October 2009
[China]
We offer 2 Nozzles High Flow Rate Fuel Dispenser-Djy-222a.
Composition: 2products, 2nozzles, 4displays, 2motors, 2pumps, 2flow meters
Huge Flux Series: A remarkable characteristic of this series is its high efficiency, rating 80-100L/min, which is almost twice of the common one.
Features:
1.Adopting combination pump or separate pump, smaller shape and convenient maintenance.
2.Adoptin
...More
|
Select
|
Stainless Steel Soap Dispenser
Accepts only domestic inquiries
Posted on: 24th October 2009
[India]
Stainless Steel Soap Dispenser offered by us are clean, hygienic and convenient to use. Our range of automatic soap dispensers are manufactured with premium quality material ensuring optimum quality to our valuable clients. Based on the requirements of our clients, we can also offer the customized range to suit the varied requirements of the clients within the stipulated time frame.
For more d
...More
|
Select
|
Fuel Dispenser Pumps
Posted on: 24th October 2009
[China]
Fuel Dispenser Pump we offer with the following description :
DJY-218A: 1product 1nozzle 2displays 1pump 1motor 1flow meter
DJY-121A: 1product 2nozzles 2displays 1pump 1motor 2flow meters
DJY-222A: 2products 2nozzles 4displays 2pumps 2motors 2flow meters
Please contact us, for more details.
|
Select
|
Dual-shaft High-speed Disperser
Posted on: 9th October 2009
[China]
Name : Dual-shaft High-speed Disperser
Category : Dispersers
Model : SFSZ Series
Capacity : 100-5000L
Working Principle
High-speed Disperser is to dissolve, disperse and mix materials with different viscosity. Through the very high peripheral tip speed of the toothed disc, the strong shearing, crashing and friction forces generated between the materials and toothe
...More
|
Select
|
High Speed Disperser
Posted on: 9th October 2009
[China]
Name : High-speed Disperser with Clamping
Category : Dispersers
Model : SFSJ Series
Capacity : 20-10000L
Working Principle
High-speed Disperser is to dissolve, disperse and mix materials with different viscosity. Through the very high peripheral tip speed of the toothed disc, the strong shearing, crashing and friction forces generated between the ma
...More
|
Select
|
Automatic Foam Dispenser
Posted on: 30th September 2009
[China]
Automatic Soap Dispenser,Foam Dispenser
Specifications:
1.Capacity: 1000 ml
2.Dimension: 120*125*270mm
3.Power supply : DC 6v, 4 "AA" high energy batteries can be used for 6 months
4.Mechanical lock
5.Infrared induction distance: 2-13 cm
6.Circuit board: with a system of electronic mist and water protection
7.Micro-computer controlling
8.Lifespan: about 70,000 times ,under the cond
...More
|
Select
|
Automatic Fuel Nozzle For Fuel Dispenser
Posted on: 24th September 2009
[China]
Three popular models of fuel nozzles for fuel dispenser:
1. Automatic Shut-off Nozzle, DJ-11A-1
Inlet ThreadBSPT/NPT 3/4''
Diameter of spout13/16or15/16
Color of insulatorred / green / blue / yellow / black
Package: 10pcs/carton
Package Dimension: 420*340*400mm
Net Weight: 13 KGS
Gross Weight: 14 KGS
2. Automatic Shut-off Nozzle, DJ-11A-2
Inlet Thread BSPT/NPT1''
...More
|
Select
|