Oil Field & Power Transmission:

Applications : Above Products include excellent electro magnetic performance for their intended applications providing upto 98% transmission efficiency depending on frequency Some of these are Naval Radomes : used in shipboard radar applications, High data rate communications systems, gunfire control and high - band width data link terminals. Composite Refelectors : With surface tolerances of .005 inch are used to optimize gain and reduce side lobes in applications up to 44 GHZ. can be designed for ground - based, shipboard or airborne applications. Architectural Radomes : Ante

It is Automatic Power Factor Controller Panel Range - 30 KVAR to 1000 KVAR

Switch Yard Structure Changes can be made to suit customer specification after discussions with out sales and production team.

Transmission Tower The wide range of tower, support structure, lattice frame and trusses for single/double, triple and multi circuit E.H.V. over head transmission line. All are hot deep galvanized structure made of various grade and quality of steel as required by customer. Galvanised substation/switch yard structure ranging from 33KV to 400KV substations for various state electricity board. Power distribution companies & power plants linked with power grid. Microwave Tower Ground Based & roof top galvanized telecom tower as per latest design approved by

Earth leakage circuit breakers is a current operated fast leakage protector of pure electromagnetic types, which can cut off fault circuit rapidly in order to avoid any incident causing accident. These are used mainly to prevent electric fire and personal casualty. Our product is compact design minus any auxiliary power and finest working reliability. The functionality of the circuit is not influenced by any temperature factor or lightning. When the current of vector differential value works against the operated current, the trip takes place and cuts off quickly in order to protect the device

THIS EQUIPMENT IS MEANT FOR FAULT FINDING ON HVDC POWERLINES RANGING FROM 66KV TO 800KV. FAULTS SUCH AS SHORT CIRCUIT, OPEN JUMPER, LOW INSULATION OF INSULATION,ETC. THE OUTPUT IS A HARD COPY PRINT OUT OR IN LAPTOP COMPUTER. RANGE 0-2000 KMS RESOLUTION 100METERS FAULT TYPE ALL TYPES OF FAULTS DISPLAY HIGH RESOLUTION LCD PANEL

General Features: » Panels will be suitable for 415 ± 6% volt, 3 phase (4 W + E) 50 HZ AC supply » They will be installed indoors and will work efficiently up to an ambient temperature of 50°C » All doors will be suitably labeled and marked for convenience of operation & maintenance Construction: Modular design, Free standing, Floor mounting type using 2.0/1.6 mm CRCA sheet. The complete structure shall be rigid, self supporting & free from twists and bends. The panels will be totally dust and vermin proof. They will have fixed or draw out type executions as many be desired. Finish: The entire panel will undergo pretreatment covering decreasing, water rinsing & derusting/ phosphating. It will be synthetic enamel painted or powder coated as per requirements. Bus Bars & Internal Wiring: Uniform cross section copper Bus Bars (current density 1.39 amps/sq.mm.) supported by SMC /DMC bases will be employed through out the length of the panel. Internal wiring be carried out with 11000/650 volt grade PVC insulated stranded conductor wire. All joints will be solidly crimped using copper thimbles Earthing Bus Bars will be running all along the board. Switchgears/ Components: Along with the formal offer, the GA drawing and the bill of material will be submitted specifying the makes & capacities of all the material to be used in the panel. Standards: Ours Panels conform to the standards such as, IS 4237; IS 8623; IS 375

We offer Cold Shrink Termination&Joints from 6kV to 36 kV and also Plug In Type Preomolded Cable Accessories

* UNINTERRUPTED TRANSIENT FREE POWER SUPPLY. * MINIMUM DOWN TIME. * REMOTE OPERATIONS & MONITORING OF TELE-COM SITES. * HIGH/ LOW VOLTAGE PROTECTION WITH CONSTANT OUTPUT VOLTAGE. * MAXIMUM MAINS AVAILABILITY. * USER FRIENDLY BY PROVIDING MIMIC & LCD DISPLAY. * REMOTE ALARM EXTENSION TO MINIMIZE THE DOWNTIME. * REMOTE MONITORING OF TELE-COM SITE THROUGH GSM MODEM. * DATA LOGGING & DATA TRANSFER FACILITY. * COMPLETE MONITORING OF D.G. SETS, MAINS SUPPLY, AIR CONDITIONERS, ROOM TEMPERATURE, BATTERY HEALTH, FIRE & SMOKE ALARM, AVIATION LIGHTS ETC.

* LIFE TIME GREASE LUBRICATED. * RIGID AND STURDY CONSTRUCTION. * LOW NOISE & VIBRATIONS. * CASE CARBONIZED GEAR COMPONENTS FINISHED TO DIN CLASS - 6 ACCURACY.

Shrijee Heavy Works Ltd. provides a range of towers, support structures, substation structures, lattice frame and trusses for effective power transmission and supply. With the state-of-the-art infrastructure, using latest CNC machines coupled with well trained manpower ensures repeated accuracy in the production of all components, thus eliminating mismatch at site. We provide the following services * Transmission line towers: All types of lattice transmission towers: multi circuit, starting from 132 KV to 765 KV * Telecom Towers: Lattice steel structures of any height with component length up to 7 meters for single-dip galvanizing. Building up capabilities for tubular structure as well. * Wind Turbine Support Towers: Fabrication & galvanization of all tower components except mono-pole structures. * Substation Structures: Fabrication & galvanization of all tower components except mono-pole structures. * Railway Electrification Structures: Overhead equipment masts and fabricated portal structures.

Plaromester speed variators offer torque proportionate power transmission in 7 size and output speed from 0-450 Rpm with power rating upto 7.5 kW

DENSONS HEAT SHRINKABLE TERMINATIONS UPTO 36 kVbr FOR 3 Core XLPE/EPR Insulated Cable Specifications AC Dry withstand Voltage : 75 kV / I min. Impulse withstand Voltage : 170 kV / 10 shots Corona extinction Voltage : More than 38 kV