* Flexibility: With a wide range of currents and trip characteristics available, you can choose the appropriate level of protection for your application. * Energy Limiting Capability: These devices allow 10 to 20 times less "let-through" energy than conventional circuit breakers, resulting in less wire heating and minimizing damage to downstream components. * Simplified Maintenance: The red/ black flags and toggle position identify the localized fault so troubleshooting can be done quickly. * Global Product Offering: These devices are designed for worldwide applications.

Miniature Circuit Breaker Remso MCB is recognized for its quality and the breadth of its range. This makes it an indispensable choice for low voltage installations in the industrial, commercial & residential sectors, final electrical distribution needs are continuously evolving, improved operating safety & continuity of service, greater convenience, operating cost management. Miniature circuit Breakers have been designed to continuously adopt to these changing needs. Range 6A to 40A in ‘B’ Curve 0.5A to 63A in ‘C’ Curve 0.5A to 63A in ‘D’ Curve 0.5A to 63A for DC A

HT Circuit Breakers Oil / SF6 / VCB Indoor / Outdoor type of a wide range (rupturing capacity) from 13.12kA / 18.37kA / 26.25kA & above; Rated Current of 400A- 630A-800A-1250A-1600A & above; Rated Voltage range of 3.3kV- 6.6kV-11kV-12kV-33kV-36kV-66kV-132kV class & beyond, motorized/ manual, conforming to Indian & International standards. Vacuum Circuit Breakers (VCB) SF6 (Sulphur Hexafluoride) Gas Circuit Breakers Bulk & Minimum Oil Circuit Breakers (BOCB & MOCB) Panels with necessary accessories including current transformers (CTs), potential / volt

Applicable Standard (IEC 60298 & 60694 , 153427: 1997) Indoor metal clad panel, IP 4x Externally & IP 2x between Compartments , 100mm(min), 2000A , Rear Botton , EV12 Horizontal draw out & Fixed version

Motor Protection Circuit Breakers Rating: MPCB Type, MG1 and MG2

INTEGRATED CIRCUITS

We have a wide range of circuit breaker equipment, both MCB and MCCB. The range of MCB boards are highly durable and allow the installer maximum flexibility. • Current Ratings: From 6 Amps to 40 Amps • Different series including high rupture capacity, single to four pole • High breaking capacity: 20 - 15 - 10 - 6 K A • Nominal rated currents from 0.5 to 63A • Wide range of the executions for both the MCBs and the accessories combined main contacts Easy fitting and dismantling • By means of the special lower latch the MCBs are fixed on the DIN EN 50 022 rail (width 35 mm). The latch makes the MCB fast on the rail: Further more it is possible to lock the latch in an open position that enables easier side-shifting along the rail. Easy and fast connection - combined terminal clamps • The MCBs are equipped with the combined terminal clamps on the upper and lower side • MCBs are delivered with terminal clamps in open position, i.e. ready for insertion of conductors or busbars.

SALIENT FEATURES : * MEETS LATEST STANDARDS. * SHOCK PROOF : FINGER PROOF AS PER TEST. * QUICK BREAK OPERATING MECHANISM. * ENERGY SAVING. * CLAUSE 9.6 OF 8828. * CURRENT LIMITING DESIGN. * FIRE RETARDANT BODY. * 12 PLATE ARC CHUTE. * ANGULAR VENTS. * DIN RAIL MOUNTING ( 35 MM DIN RAIL). * PAD COVERING IS ON/OF POSITION.

Technical Data : Standard : Confirming to IEC60898 Protection : Against overload and short circuit Rated current In : 1,2,3,4,6,10,16,20,25,32, 40, 50, 63A Rated voltage : 1 pole 230/400V AC 50/60Hz 2, 3, 4pole 4OOV AC 50/60Hz Breaking Capacity : 6 kA Characteristic : B, C, D curve Number of trip : 1P, 1P+N, 2P, 3P, 3P+N and 4P Type of trip : Thermal-magnetic release Type of terminal : Lug type Terminal capacity : Cables up to 25mm² Installation : Mounting on 35mm DIN rail Width : 1 7.8mm per pole Electrical endurance : In : 1 ...32A 40 ...63A Endurance : 6000 cycles 6000 cycles Max. frequency (Cycles / hour) : 240 120

C&S ACB, conforming to IEC 60947 Part 2 and IS 13947 Part 2, are available from 630A to 6300A, 3 pole as well as 4 pole, in all possible versions - Fixed or Drawout, Hand operated or Motorized. The 4 pole incorporate true 4th pole - rating & contacts same as the main poles but with advance closing and delayed opening mechanism to avoid any Switching Surges and Remnant Transients. Accessories : All commonly required Accessories are also offered along with them as per the customer choice - Auxiliary Switch, Shunt Release, Under Voltage release, Position.

MCCB, in which a circuit breaker and trip device are assembled in a mould case, can manually or electrically open and close the electric circuit. MCCB can automatically cut off electric power in case of overload and short circuit. Characteristics MCCB and ELCB (Earth Leakage Circuit Breaker) with the same size this features interchangeability and construction with modularized panel since the size of MCCB is the same as an ELCB in the same frame. And it's easy to replace and maintain. Various Ratings MCCB has a variety of rated current frame from small to large capacities (30AF~1200AF).

Wide Range of Miniature Circuit Breakers.

* Dual Tripping - Overload tripping & Magnetic Tripping * Energy saving upto 40%-50% by using low resistance bi-metalic strip * Early cut off in less than 0.003 sec. * Auxiliary contact shunt trip Electrical Data : * Design According to - IS : 8828 : 1996 * Rating s - B Type : 6 Amp to 63 Amp- C Type : 0.5 Amp to 63 Amp * Rated Voltage - 240 V / 415 Volt AC * Rated frequency - 50/60 Hz * Characteristic - B & C * Endurance - 20000 Operating Cycles * Line Voltage Connection - Optional (Line / Load) * No. of poles - SP, SPN, DP, TP, TPN, FP Mechanical Data : * Frame Size - 45 mm * Device Height - 83 mm * Device width -17.5 mm * Terminal Capacity -1 to 25 mm2 * Upper & Lower Terminals - Open mouthed / Lift Terminals * Terminal Protection - Finger & Hand Touch Safe * Terminal Fastening Torque - 2 to 2.4 NM * Mounting - Mounting in any distribution board Independent of Position * Material - Fire Proof Housing

Wide and varied application in industries as well as in domestic sector for using low voltage distribution circuits for continuous power supply. Unique Features : * Choice of 2 Pole or 4 Pole Version * Front operation with 3 stable Position I-O-II * Isolation at Middle Position * Easy Mounting on DIN Rail Technical Data : * Standard AS per -IS : 13947 - 3 * Ratings - 25 Amp, 40 Amp * No of Poles - 2 , 4 Pole * Rated Voltage - 240 V/ 415 Volt AC * Rated Frequency - 50 Hz * Utilization category - AC 21A

Our range of change over finds wide application in industries as well as in domestic sphere for use in low voltage distribution circuits, wherever continuity of supply is necessary, for switching to an alternate source of supply from main supply and vise-versa. It is provided of switch dis connectors with independent manual operation, capable of making, carrying and breaking currents under normal circuit conditions, which may include operating overload condition and also carry currents under specified abnormal circuit conditions such as those of short circuit for a specified time. Some of the features of our change over are: * Compact construction * Double break contacts * Shrouded terminals * Front operation * Centre position off * Can be mounted with other products.

Rated Voltage 240/415 V Breaking Capacity 10000 A

FEATURES * Compact in size * High short circuit breaking capacity (50kA) * Current limiting design * Door coupling handle for clear ON / OFF / TRIP indication * Conforms to IEC 947-2 and 3, IEC 947-4-1 standards * Din rail mounting for the entire range. * Wide range from 0.16 A to 63 A with adjustable overload. * Differential trip indication facility for trip alarm contact. ACCESSORIES * Standard auxiliary contacts (front and side mounting) * Trip indicating auxiliary contacts * Shunt release * Under Voltage release * Door coupling rotary handle

Isolator we offer to clients is an off load device, which electrically isolated the circuit or circuits that are connected to it. Our range of Isolator is available in different ampere rating including 40A, 63A & 100A depending on their area of application. The major advantage of isolator is : # It isolated the circuits, which are continually powered. # It is a key element that enable an electrical engineer to work safely on the protected circuit

ELECTRICAL WIRING ACCESSORIES

Fast acting, high current rupturing capacity breakers like electrical circuit breakers are offered to safe guard the human life, equipments & installation from the following faults occurring in the electrical system. * Over load * Short circuit * Ground faults Types : * Low voltage Low voltage air circuit breakers are offered in Fix, Draw out, Manual & Electrically operated versions. They are either 3 pole type or 4 pole type. Ranging from 400 A to 6300A * Medium Voltage 6.6 KV, 11KV,22KV,33KV System Voltage. Available in Indoor & Outdoor versions. With a choice of Vacuum or SF6. In indoor type retrofitting trolley can be provided to replace the existing oil circuit breakers economically & quickly.

SPECIFICATION : IS 8828 ;1966. * RATING : 0.5 A TO 63 A. * NUMBER OF POLES : SP, SPN, DB, TP, TPN & FP. * RATED VOLTAGE : 240/ 415 V. * HOUSING : GLASS FIBER REINFORCED POLYESTER.

miniature circuit breakers are used in overload and short circuit operations.

HEAVY DUTY OF MITSUBISHI MINIATURE CLOSE CIRCUIT BREAKER.