Features SMPS & PWM Technology. Boost & Trickle Voltage. Constant current limit. Available in 12, 25, 36, 48, 60 & 72 Volts Wide Input voltage range 160V - 275 Volts

Battery Plate Charger We design Battery Plate Chargers which suffice our clients' needs and assists them in achieving their desired results. Below are certain features to look for: • Reduction in wastage of power consumption • High Enrich Efficiency which gives our clients close to 90% efficiency • Automobile Float Boost & Trickle charger mode • It comes with single battery charging • Gives its users option for charging current • Parallel Battery Connections • Wall Mountable Protection Measures: • Automatic thermal shut down & recovery • A/c input und

Mobile Travel Charger (Advanced) Description: Charge your mobile phone using axiom's mobile charger with real time indication. Suitable for all model of NOKIA, NOKIA nSeries, PANTECH, LG, KYOCERA, SAMSUNG, ZTE, RELIANCE, SONY ERICSSON (Higher), SONY ERICSSON (Higher), Motorola (Pin), Motorola (USB). Specification:

We manufacture and supply a complete range of high performance traction battery chargers for all the standard ratings. Designed in compliance with international market standards and parameters, our range of traction battery chargers, includes - standard conventional uncontrolled two step traction chargers and Micro-controller based design constant voltage, constant current battery chargers. Designed using the latest technology, our traction battery chargers deliver flawless performance with long service life. Our range varies from 12V to 72V up to 80 Amps. We are capable to design our products as per the requirements of our clients.

Battery Charger is designed for charging eighteen batteries at a time. Which has twelve stations of 0.25 & 0.5 amp charging current & six station of 0.75 & 1.00 amp charging current. BATTERY CHARGER WITH LOAD TESTAR This is the compact Battery Charger & Load Tester , design for small workshop. With this we can change two battery at a time & can also check condition of battery by using Load Tester provided in the unit.

We manufacturer Industrial Grade Chargers, which find its application in Hydro power plant, Sub-stations, and factories. Charger Type : Isolated Float cum Boost Charger with DCDB * AC Input : 440V +/- 15% * AC Input frequency : 50 Hz * Output Voltage : Normal 48V/110V * Float Adjustable from front panel to Suite the Battery * Boost Adjustable from front panel to suit the Battery * Output Current Limit * Power Conversion Device 50A/70A/110A as Required * Adjustable to Suit the Battery * Three Phase full Wave Controlled * Protection and Switch Gear : <1% for given input range * Micro Processor Controlled Input- TPN MCB * Output- DP MCBs for load * Battery- DP MCB * Capacitor- HRC fuse * Thyristor- Semiconductor fuse * Meter and Indication LCD screen to display various status and Errors. * Equalization (Manual and Automatic) : Frequency and duration of equalization are programmable through menu. * Earth Fault Detection : Adjustable and can be enabled or disabled from front panel menu. * Diode Drop : Automatic to lower the load voltage during Boost charging or Equalization charging.

PRODUCT SERIES : SMPS – BATT. CHARGER PRODUCT NAME : SMPS BASED BATTERY CHARGER sPECIFICATIONS :-

Battery Chargers Heavy duty isolation transformer with cage clamp technology screwless connectors provides full protection against voltage fluctuation and any short circuits. Full wave bridge block on aluminium heat sink dissipates heat faster. Voltmeter and ammeter with selector switch helps to choose the required settings. Input glass fuse on the transformer, output MCB for overload and short circuit protection is an added advantage. Rocker switch with mains indication denotes supply. Powder coated enclosure for long life. Models : 1 A-48/96V, 2A-24V, 4A-24V, 6A-24/36/48/72V, 10A-48V/

WONDER APPLIANCES PVT. LTD.

* Input: 85-264V AC (50Hz), OR 110VDC/130 Amp. * Also available in any output like: 12/ 24/ 48/ 110 V DC and Currents (normally 5 amp to 100 amp.) * Auto sensing for float and boost mode. * Indications for I/P, Float & Boost, Digital panel meter is provided for output voltage and current (selection through toggle switch) * Card approvals: UL 60950,C-UL(CSA60950) EN 50478 Complies with DN -AN and IEC60950 * Conducted noise approvals: complies with FCC-B CISPR22-B, EN55022B, and VCCI-B * Low voltage Directive and EMC Directive, Harmonic: Complies with IEC6400 0-3-2

SMPS Chargers Sealed Energy Systems provides its customers with the electrical power solutions they require. These may be complete custom-made solutions or may be simple and economically priced modified standard products with a relatively short delivery time. SESÂ’s Engineering team has the depth of knowledge to develop custom-made solutions to meet the customers needs in the most suitable and cost effective way. CHARGERS FOR SEALED LEAD ACID BATTERIES Lead Acid batteries have an economical price and a long lifetime. They are a good alternative for mobile power if the very low power d

Battery Chargers: Battery Chargers are used to charge rechargeable batteries time and again. Available in the range of 12 VDC to 240 VDC at various current levels, our battery chargers are suitable for both single phase and three-phase input. Designed and fabricated with precision, our battery chargers provide a constant voltage and current to charge batteries. GSA battery charger three-step charging method guarantees optimum efficiency, meaning your batteries will perform better and last much longer. Main Features of Automatic / Manual Battery Charger: Study of customer’s DC Loa

Specifications: Mains Supply : 230 V AC +/- 10 % 50 Hz. Battery Volts : 6-72 volts Battery AH : 100-400 AH Charging Current : 10-30 A. Transformer : Copper Double wound- Heavy duty Rectifier : Full wave Bridge Mode selection : Rotary Switch Protection : a) Mains incoming fuse b) Out put fuse LED Indications : Mains Terminals : Input supply by 3 pin Main cord : Out put by heavy duty terminals. Enclosure : Heavy duty Sheet Steel enclosure finished with Powder coated.

Plate Charger

A full wave rectifier circuit with a diode bridge is used for the rectifier circuit which changes AC into DC. Even if the alternating voltage of the input changes into the positive and the negative, the voltage which is applied to load is always positive by a diode bridge. The voltage which is applied to load is not a clean DC. It is called Ripple voltage. In this circuit, in order to make the ripple voltage small, the capacitor is connected to load in parallel. Even if the voltage which comes out from a diode bridge becomes small, the DC voltage applied to the load is stabilized by the discharge electricity stored in the capacitor. 3EM provides a highly reliable, Rectifier Battery Charger with full load sharing capability in a compact, modular rectifier system. It offers high power density levels combined with high efficiency. With current limiting circuitry, voltage regulation, high efficiency and a high power factor, the Rectifier Battery Charger is the ultimate modular rectifier for utility applications.

Technical Specifications: • Input: 130 to 265 VAC ; 47 - 53 Hz • Output: 13.5 V @ 2A CV-CC • Size: 154 X 63 X 40 • Line and Load Regulation: <1 % • Ripple < 1 %, Efficiency >1 70 % at full load and normal I /P • Operating Temperature: 0 to 50 deg C ; RH 95 % non condensing • Input / Output Isolation > 50 V Other Features: • Natural cooling • Output short circuit protection • Output over voltage shut down (latch type) • Input emi - rfi filters along with MOV protection • Screw type input / output connectors • Output LED indication • Integrated Mosfet and PWM controllers for greater reliability and space saving • Output voltage can be adjusted over +_ 1 Volt

Our sales staff at AR Industries is committed in offering a full line of quality sunbeam series,mobile phone charger, cell charger and electrical products at an affordable cost. When you make a purchase at AR INDUSTRIES, you are buying from the factory direct source. Our company is a nationwide distributor of accessories for mobile charger, adaptor, sunbeam series etc. We sell directly to consumers, corporate customers, government agencies, and resellers. Every product we sell undergoes extensive quality control by our technical staff before you see it listed in our online store. For that reason, we have been successful in making sure that every product meets your standards.

Every week battery puts strain on the engine and its fuel line by unwarranted pumping of more fuel than actually required and floods the cylinder. Even the self-starter has to overwork, if the battery is not fully fit, thus reducing the life of starter motor. So keep the battery of your Gen-Set always alert, by just connecting the 'Max Power' Automatic Battery Charger in circuit. Conventional charger can not correct themselves as circumstances warrant. Conventional Battery Charger is fault prone such as overcharging, thus causing irreparable damage to battery cell. Max Power Battery Charger takes care of itself against all odds. Max Power Battery Charger has following functions: * Thyristor control. * Automatic trickle and boost charging facility. * Over current and over voltage protection. * Short circuit and reverse polarity protection. * Goes to float condition if battery is fully charged. * Cuts off automatically from circuit when Gen-Set is on. * Suitable for operation between 180 and 250 volts.

The Worlds Smallest DV Battery Charger Switching power supply with might power eculiar and portable collapse able plug quick and safe precision PC control application of ergonomics

* 6A TO 200 A DC CURRENT. * 6 V TO 240 V-DC VOLTAGE. * BOOST/ FLOAT MODE CHARGING. * HEAVY DUTY & ROBUST. * HIGHLY EFFICIENT. * OUT PUT VARIABLE IN STEPS/ CONTINUOUS. * OVER LOAD PROTECTION. * SINGLE PHASE/ THREE PHASE INPUT. APPLICATION : AUTOMOBILE WORKSHOP/ GARAGES/ LOCO-SHED/ RAILWAY WORK SHIP/ POWER PLANTS/ TELECOMMUNICATION TRANSPORT WORK SHOP/ CHARGING STATIONS.

- Actuator of Cummins D.G. Set (Recon & New) - New Actuator Rs. 21000/- with one year working warranty - Replacement of Old Actuator with new one Rs. 14000/-

A WIDE RANGE OF CHARGE FROM MOTOR-CYCLE TO TRUCK BATTERIES. ALSO AUTOMATIC CONSTANT CURRENT CHARGERS FOR MAINTENANCE FREE BATTERIES.