State of art microcontroller design for precise timing LED display for elapsed time indication External reset signal, program enable and disable facility Hold/Restart facility during power failure conditions. Dimensions: 96�96�110mm (W�H�D)

A wide range of Timers are available: *ON DELAY TIMERS *OFF DELAY TIMERS *DIGITAL TIMERS *SEQUENTIAL TIMERS *POWER OFF DELAY TIMERS *CYCLIC TIMERS *BAG FILTER TIMERS *COMBINATION TIMERS *STAR DELTA TIMERS *TIME SWITCHES *TIME TOTALISERS

this timer is used in auto electricals testing equipments to operate their products one by one time is selected by potentiometer which is situated at back panel

CTA TIMER / COUNTER / TACHOMETER (DELTA) 3-IN-1 Timer / Counter /tachometer. Decimal point setup available. Mixer timer + counter function. 6 Digit LCD display. Max speed of the counter 10kbps. DIP switch for quick setup chage. "Reset" and "LOCK" key available for convenient use. 12V power supply for internal and external sensor NPN and PNP input signal available. Relay and Transistor basis output. Pre-scale function displays input concrete function. Counting type: 1-step counting, 2-step counting, batch counting, t

Special Features: Only Analog Timer with Percentage Time Elapsed Indicator (PTEI) Wireless interiors makes it highly rugged & error proof. Universal Power Supply Only Adjustable Reverse/Forward Timer with RUN and JOG Mode Available with screw type terminals as well as plug-in types Calibrated dial with +/- 5% Accuracy Only Adjustable Cyclic Timer with PTEI and User Selectable ON and OFF Sequence Technical Data:

Special Features: Only Analog Timer with Percentage Time Elapsed Indicator (PTEI) Wireless interiors makes it highly rugged & error proof. Universal Power Supply Only Adjustable Reverse/Forward Timer with RUN and JOG Mode Available with screw type terminals as well as plug-in types Calibrated dial with +/- 5% Accuracy Only Adjustable Cyclic Timer with PTEI and User Selectable ON and OFF Sequence Technical Data:

Special Features: Only 22.5mm TIMER with Wireless interiors Multi range and Multi mode type of timers Designed to be mounted on DIN channel as well as mounting Uses digital IC's to give accurate repeat cycles Most Simple setting arrangements Calibrated dial with +/- 5% Accuracy. Technical Data:

TM - 620 : - Specifications : - One Channel 620C: 6 Start/6 Stop with 1On/On/Off Cycle. 620S. 14 On with 1 Delay off. Manual On / Off / Auto. Daily Digital Timer Power Supply : Line Voltage, 24, 110. 220 (240) Vac. 12, 24 Vdc. Contact rating : 16A (8A)/250V, 0.5HP / 250V. Own Consumption : 7VA. Programming Resolution. 1 Minute / 1 Second. Timing Resolution : 1 Second.

TM - 621 : - Specifications : - One Channel 6 On / 6 Off. On / Off / Auto Temporary Override 24-Hour Digital Timer Power Supply : Line Voltage, 24, 110, 220 (240) Vac, 12, 24 Vdc. Contact rating : 620/620L. 16A(8A)/250V,0.5HP / 250V. 620H:20A(10A)250V,2HP / 250V Own Consumption : 7VA. Programming Resolution : 1 Minute Timing Resolution : 1 Second.

TM 100A Features Interfaces with conversion front panels to replace popular industry tap changer controls. Serial communication ports with several on-board communication protocols. Two active serial communication ports, through RS-232 & RS-485. Technical Specifications

We at Best Systems & Services offer basic electronic equipments that are simple, sleek, reliable & cost effective. We manufacture from basic timer & counter to micro-controller based flow integrator totalizer, batch counter & pressure transmitter. We offer: * Process Indicator * Batch Counters * Time Totalizer * Alarm Annunciator * Production Counters * Electronic Timers Digital Panel Meters : * Digital Counters & Pre Settable Counters * Digital Timers & Cyclic Timers * Sequential Timers * Digital Temperature Indicators & Scanners * Digital Process Indicators * Proximity Switches * Photo Sensors * SMPs Power Supply * Optical Encoders * Laser Sensors * Other Special Sensors * Digital Timer * Digital Programmable Timer * Digital Timer Totalizer * Digital Cyclic Timer * Digital Time Internal Counter * Digital Counter * Digital Even Counter (Up to 6 Digits) * Digital Preset Counter (Unto 6 Digits) * Digital Programmable Counter (6 Digits) * Digital Batch Counter * Digital Length Counter * Digital RPM counter (Tachometer) Timer & Counters * Panel mounted ABS moulded Cabinets * Size 96x96mm, 72x72mm and 48x96mm * Red LED display * Up/down counting * Manual / Auto reset * Input: Proximity sensor / Encoder / Micro switch

Application: * Glow sign Board/Boxes * Outdoor Lighting * Decorative Lighting * Hoarding Lighting * Garden Lighting * Street Lights etc., Features: * Complete intelligent controls * Save up to 30% power * No light Dependant sensor (LDR) * Switches on and off on set time * Safety against voltage fluctuations * RTC - universal real time clock product * Micro controller based product * Up to 5 ON/OFF timer per day

We offer a wide range of count down timer , that is used as devices for controlling traffic. This consists of a standard pedestrian signal with standard shapes and color, with an added display that shows the countdown of the remaining crossing time. The countdown timer starts either at the beginning of the pedestrian phase . The timer continues counting down through the pedestrian clearance interval. At the end of the pedestrian clearance interval, the countdown device displays a zero and the “DON'T WALK” indication . Objective : To provide information to pedestrians about how much time is left to cross the street at signalized intersections. Applications : This treatment is useful under the following conditions: * Pedestrian clearance interval greater than 15 seconds * High pedestrian volumes * High levels of vehicular traffic conflicting with pedestrians * Presence of mobility-impaired pedestrians * School zones

Our delay timer is available from 1 sec to 60 minutes timings in 10 steps with a choice of ON/OFF delay. The timer is suitable for continuous working in railway signaling and indoor use. Two change-over un-energized contacts with 5 Amps rating are provided on DIN rail 35mm enclosure.

RANGE : * PHASE CONTROL THYRISTORS : UP TO 7000 MAP X 4500 VOLTS. * FAST-SWITCHING DISTRIBUTED GATE THYRISTORS : UP TO 3800 AMP X 4500 VOLTS. * RECTIFIER DIODES : UP TO 8400 AMP X 6000 VOLTS. * FAST RECOVERY DIODES : UP TO 2400 AMP X 6000 VOLTS. * GATE TURN OFF THYRISTORS (GTO) : UP TO 4000 AMP X 6000 VOLTS. * MEDIUM VOLTAGE THYRISTORS : UP TO 3700 AMP X 6500 VOLTS. * PULSE THYRISTORS : UP TO 8000 AMP X 4500 VOLTS. * PRESS PACK IGBT DEVICES : UP TO 1500 AMP X 5200 VOLTS. * IGBT GATE DRIVES. * SILICON POWER ASSEMBLIES SINGLE AND MULTI-PHASE BRIGADES AC SWITCHES AND REGULATORS PULE POWER ASSEMBLIES IGBT BRIDGES.

FEATURES : * DIGITAL DISPLAY FOR SET VALUE AND PROCESS VALUE WITH EXTERNAL START SIGNAL. * PROGRAM ENABLE & DISABLE FACILITY. * HOLD/ RESTART FACILITY DURING POWER FAILURE CONDITIONS.

Micro-controller based Digital Counter - Totaliser is useful as object or pulse counter in different process and industries. Input pulse can be from proximity switch, infra red sensor, voltage pulse or NO-contact of a switch. It can be RESET by front switch or from rear terminal. 6 digit 0.56� height bright RED LED�s display the count of object. In case of power failure, the display count is retained in non volatile memory without any battery. The power consumption is less than 5 Watts. Operating supply voltage is 230 V AC + 10%, 50Hz. Housed in enclosure of DIN size 48(H) x 96(W) x 110(D)mm.

Digital Timer Model FC2541 FC2561 offered by FABROTECH are useful for time and control application in various industries. The 4 or 6 digit Timer can be used in different combination of Hour, Min. & second covering the time range from 0.1 second to 9999 or 999999 Hour with the help of dip switches. It can be RESET by front switch or from rear terminal. The UP or DOWN counting or cyclic mode can be selected through dip switch. Cyclic mode can have equal ON & OFF time OR unequal OFF+ON time set by 2+2 (4digit) & 3+3 (6digit) thumbwheel switches. 4/6 nos. of 0.56 inch height bright red seven segment LED?s display the time. The output is provided through 1 or 2NO/NC relay contacts rated at 5A/230V. Output can be delayed ON or delayed OFF. Relay can be latched or AUTO RESET (the relay activation time of 1sec. is provided by factory for AUTO RESET). In case of power failure the display time is stored in non volatile memory. The power consumption is less than 5 Watts. Operating supply voltage is 230 V AC + 10%, 50Hz. Housed in enclosure of DIN size 96(H) x 96(W) x 110(D)mm.

Digital Miniature Timer (2 Digit) in 48 x 48 mm enclosure. The Time range is 0.1 Seconds to 99 Hours, with accuracy better than 0.02%. This Microcontroller based timer has user selectable mode : Delayed ON, Delayed OFF (Interval ON), Cyclic first ON & Cyclic first OFF. In Cyclic mode, ON & OFF time are independently settable to any value from 0.1 Second to 99 Hours. Two Bright RED (0.56� height) LED�s, display the remaining Time (down counting). The output relay has 1 NO/NC contacts rated at 5A/230V AC. Also available with Plug-Socket Adaptor for DIN RAIL mounting.

Cyclic Timer are for continues ON & OFF operation and control application. Microcontroller based Cyclic Timer with ON & OFF time are independently settable to any value from 0.1 Second to 99 Hours. The output relay has 1 or 2 NO/NC contacts rated at 5A/230V AC. Also available with Plug-Socket Adaptor for DIN RAIL mounting.

2/3 DIGIT TIMER WITH T/W SETTING.

The counters fabricated by our company are widely used in diverse industrial applications. These counters are completely digital and perform optimized counting operations in a fraction of time. They are specifically designed to suit variegated industrial applications and can further be tailored as per the preferences and needs of our clients

The watchman timer provided by us is manufactured with acute precision for accurate and faster results. This timer is based on latest and modern technology and innovative designs. Technical Specifications: * Sixteen horns * Eight sirens * Two alarms * Real time clock * Four seven segment display * Two relay output * 32 LED for horn indication on front plate * Setting is done by five keys on the front plate for setting

Features 1) Real Time clock with led display 2) Works with 230vac or 12v dc 3) In built battery backup for clok 4) 5Amp load capacity 5) 2,4 or 8 cycle programing mode 6) Small in size and easy to use

ELECTRONIC TIMER OPERATES WITH UNIVERSAL SUPPLY VOLTAGES. IT IS BEST SUITABLE FOR SMALLER RANGE TIME-DELAYED OPERATIONS IN ELECTRICAL PANELS AND THE MACHINES. FEATURES : * MICRO CONTROLLER BASED. * ON DELAY & CYCLIC OPERATION. * UNIVERSAL SUPPLY VOLTAGES - AC OR DC, 24 V TO 230 V. * MOUNTING BOTH DIN RAIL & M4 SCREW.